This narrative review examines contemporary applications of polymeric materials in dentistry from 2020 to 2025, spanning prosthodontics, restorative dentistry, orthodontics, endodontics, implantology, diagnostics, and emerging technologies. We searched PubMed, Scopus, Web of Science, and Embase for peer reviewed English language articles and synthesized evidence on polymer classes, processing routes, mechanical and chemical behavior, and clinical performance. Approximately 116 articles were included. Polymers remain central to clinical practice: poly methyl methacrylate (PMMA) is still widely used for dentures, high performance systems such as polyether ether ketone (PEEK) are expanding framework and implant-related indications, and resin composites and adhesives continue to evolve through nanofillers and bioactive formulations aimed at improved durability and reduced secondary caries. Thermoplastic polyurethane and copolyester systems drive clear aligner therapy, while polymer-based obturation materials and fiber-reinforced posts support endodontic rehabilitation. Additive manufacturing and computer aided design computer aided manufacturing (CAD CAM) enable customized prostheses and surgical guides, and sustainability trends are accelerating interest in biodegradable or recyclable dental polymers. Across domains, evidence remains heterogeneous and clinical translation depends on balancing strength, esthetics, biocompatibility, aging behavior, and workflow constraints.

In cases of severely damaged teeth with limited coronal tooth structure and remaining hard dental tissues subgingivally, a custom‐made post‐and‐core restoration is required. Teeth with non‐circular canal space also require this type of restoration because the build‐up with pre‐fabricated posts could lead to thick cement layer. The development of CAD/CAM technologies widens the range of the materials that can be used for prosthetic restorations. Along with base dental alloys, newly developed materials may be applied. The aim of the article is to present four clinical cases of severely damaged teeth which utilize different materials and different production techniques for custom post‐and‐core fabrication. In the first clinical case, a metal post‐and‐core restoration was fabricated by direct metal laser sintering. In the second clinical case, digital technologies were used to produce a 3D‐printed resin prototype for further investing and casting from base metal dental alloy. In the third clinical case, fibre‐reinforced composite was used for fabrication of the custom post‐and‐core by milling. In the fourth clinical case, the restoration is produced by milling of lithium disilicate ceramics IPS emax CAD (Ivoclar Vivadent, Lichtenstein). The bond between the fibre‐reinforced composite post‐and‐core and the hard dental tissues offered possibility to compensate—to some extent—the shape of the preparation which was not optimal. CAD/CAM technologies applied in these clinical cases provided combination of high accuracy of fitting with good stability and individual shape of the restorations. © 2023 Australian Dental Association.

BACKGROUND: Metal ions emitted from dental alloys may induce oxidative stress leading to numerous pathological changes. Lipid peroxidation may cause disturbance of structure and function of cell membranes, apoptosis, autophagy, and formation of potentially mutagenic compounds. Products of interaction between reactive oxygen species and biomolecules may be used for evaluation of oxidative stress level. AIM: The aim of this study was to evaluate the influence of the prosthetic dental treatment with metal ceramic restorations on the level of oxidative stress in the oral cavity. MATERIALS AND METHODS: Metal ceramic crowns with copings fabricated by direct metal laser sintering were produced for 35 patients. CoCr dental alloy EOS CobaltChrome SP2 (EOS) was used. Non-stimulated and stimulated saliva samples were collected from the patients before and after the prosthetic treatment. For evaluation of oxidative stress concentration of 8-isoPGF2-alpha was measured by liquid chromatography tandem mass spectrometry. For statistical processing, non-parametric Wilcoxon signed-rank test and Mann–Whitney test were applied. RESULTS: The concentration of isoprostane 8-isoPGF2-alpha in non-stimulated saliva was lower 2 h after fixing the crowns compared to the initial level and statistically significant difference was observed. On the 7th day the concentration of isoprostanes remained significantly lower than the initial one. No significant differences were found in isoprostane concentration in stimulated saliva before and after prosthetic treatment. CONCLUSION: Prosthetic dental treatment leads to decrease in oral oxidative stress.

INTRODUCTION: The smoothness of a ceramic’s surface is very important of its esthetic and prophylactic qualities. AIM: The purpose of this investigation is to study the possibilities of polishing lithium disilicate ceramics after making a correction on the glazed ceramic surface. MATERIALS AND METHODS: The subject of the study were 20 test samples made of lithium disilicate press ceramics. They were divided into 4 groups according to the method of processing and polishing. Group 1 was treated with a red diamond bur and polishing set; Group 2 was treated with a green diamond bur and polishing set; Group 3 was treated with a red diamond bur, polishing set and diamond paste; Group 4 was treated with a diamond bur with green coding, polishing set and diamond paste. The samples were examined with an atomic force microscope to observe the change in surface relief. The reference point for comparison was the surface of the glazed ceramic. RESULTS: After polishing with diamond paste, the surface became smoother compared to the treatment of the surface with a polishing kit alone. CONCLUSION: Regardless of the polishing protocol used, there was a difference in the topography of the ceramic surface before and after treatment.

Background: Prosthetic rehabilitation requires application of materials with different chemical, mechanical and biological properties which must provide longevity, esthetics, and safe use. Corrosion resistance and metal ion emission are the major factors defining biocompatibility of base dental alloys. Digitalization in Dentistry leads to development of new materials suitable for CAD/CAM technologies. Cobalt-chromium powder alloys are used for additive manufacturing of PFM crowns. The aim of this study is to evaluate corrosion resistance and metal ion emission of Cobalt-chromium dental alloy for 3D printing. Materials and methods: 35 metal copings were designed using digital files of intraoral scans of 35 patients. CoCr dental alloy EOS CobaltChrome SP2 (EOS, Germany) was used to produce the copings by DMLS (direct laser metal sintering). Tests for presence of free Cobalt ions were conducted at several stages of the production process. Open circuit potential measurements were conducted 2 hours, 24 hours, and 7 days after placing the copings in artificial saliva. Metal ion emission was assessed by inductively coupled plasma mass spectrometry (ICP–MS) after 24 hour- and 7 day-period of stay in the solution. Results: Tests for free Cobalt ions were positive at all stages during production of the metal copings. Eocp measurements showed high corrosion resistance which increased in time. ICP-MS showed significantly higher amount of cobalt and chromium ions after 7-day period of stay compared to 24-hour period. Conclusion: Studied alloy showed high corrosion resistance at in vitro conditions. Detected ion emission requires further investigations on the biological properties.