High speed photoelectronic optical phased arrays are demonstrated by vertically arranged GaAs-AlGaAs slab waveguides. The optical phased arrays are composed of 15-channel independently tuned waveguide with end-fire emission. We achieve a very fast beam steering step response of 0.34 µs, beam divergence of 4.7°, and beam steering ranges of around 30°with side lobe level better than 8 dB. The presented optical phased arrays provide a superior approach for high speed beam steering on a nano-photoelectronic integrated chip.

We propose an imaging system with scanning feedback of an optical phased array (OPA) for moving targets with unknown speed. The system combines OPA scanning velocimetry capability with OPA-based ghost imaging to enable trajectory tracking of targets moving within the field-of-view of the system while accomplishing image reconstruction. The proposed system can perform image reconstruction for millimeter-scale moving targets placed up to 20 m away from the camera. The system can be applied in areas such as autonomous driving and high-resolution imaging.

The beam quality of coherent beam combing (CBC) is significantly affected by the beam array schemes, which are regular hexagon arrays in most research. Here, we propose a bio-inspired Fermat spiral array (FSA) for large-array CBC, for the first time to our knowledge. The far-field distribution and beam quality of CBC with various designed FSAs was investigated numerically and experimentally; the simulated and experimental results agreed with each other. The power in the bucket (PIB) increased with the central space density of the FSA, accompanying by the weakening of the far-field sidelobes. In addition, for the FSA with constant space density, the PIB increased, and sidelobes weakened with the increase of the array filling factor. The FSA could effectively improve the PIB and weaken the sidelobe of the CBC far field by the aperiodic and nonuniform space density arrangement, compared to the regular arrays. These results provide a new approach for the beam arrangement of large-array CBC.

Digital holographic imaging has emerged as a transformative technology with significant implications for AR/VR devices. However, existing techniques often suffer from limitations such as restricted field of view (FOV), high power consumption, and contrast distortion. This paper introduces an innovative optical phased array (OPA)-based chip, integrating polarization, amplitude, and phase multiplexing for enhanced complex amplitude holographic imaging. A checkerboard-style staggered array is employed in the control strategy, substantially reducing power consumption and enabling the potential for large-scale array integration. To further enhance imaging quality, we introduce what we believe are two novel calibration strategies: one is to achieve super-resolution through block imaging methods, and the other is to image using sparse aperture methods. These advancements not only provide a robust foundation for high-quality holographic imaging, but also present a new paradigm for overcoming the inherent limitations of current active holographic imaging devices. Due to challenges in chip fabrication, the research is primarily simulation-based. Nevertheless, this work presents meaningful advancements in digital holographic imaging for AR/VR applications and provides a foundation for future experimental validations.

A centroid dynamic programming track-before-detect algorithm is proposed, which is applied for tracking the moving target with an unknown speed. Using the inertialess scanning based on an optical phased array, the experimental tracking system is established, and the obtained maximum signal-to-noise ratio is 9.97 dB. Targets of different motion states can be accurately tracked with this algorithm. In addition, we innovated the original track-before-detect algorithm by adding the variable step, so that the target with large accelerations can be tracked accurately. The accuracy of our proposed algorithm is verified numerically and experimentally, which shows that our algorithm can be used to track the target trajectory effectively, and the error in extracting the target velocity is below 2%.

The key components of a polarization-independent electro-optic (EO) interferometer, including the beam splitter, mode converter, and directional coupler, are designed based on a lithium niobate (LN) platform on an integrated insulator to ensure high extinction ratios. By elaborately designing the geometric structure of the multimode interference (MMI) coupler, beam splitting of equal proportions and directional coupling of higher-order modes are realized. The most prominent characteristic of the proposed interferometer is polarization insensitivity, which is realized by converting TM polarization into TE polarization using a mode converter, providing conditions for the study of light with different polarizations. At 1550 nm, the visibility of the interferometer is 97.59% and 98.16% for TE and TM, respectively, demonstrating the high performance of the proposed LN polarization-independent interferometer.