Non-asbestos materials are developed to replace asbestos as brake pad due to the dangers to human health. Therefore, this study aimed to explore the development of hybrid reinforced polyester composites using natural fibers such as teak wood and water hyacinth for brake pad application. Natural fibers were prepared by drying, cutting, and filtering through a 30-mesh sieve. The quantity of polyester/catalyst resin was fixed at 30 g, while teak wood and water hyacinth fibers were varied (15, 10, and 5 g). Fillers and composites were investigated using Fourier transform infrared (FTIR) and composites were further analyzed through scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), hardness, and wear resistance testing. The results of FTIR spectra showed that a 5TW-15WH sample had the lowest lignin content, while surface morphology of composites was inhomogeneous with few voids and cracks. Based on EDS investigation, carbon (C) and oxygen (O) were the two most abundant elements, indicating lignin, cellulose, and hemicellulose as the main components in composites. TGA measurement showed that 15TW-5WH sample had lower weight loss compared to others. Increasing water hyacinth caused a significant improvement in material performance, with 5 g teak wood-15 g water hyacinth in the composite, showing the highest hardness at 71.2 Shore D and lowest wear rate of 5.373 × 10-6 mm2/kg.
18 April 2022 in Mechanical Engineering for Society and Industry
Applying magnetic fields to improve the arrangement of hydrocarbon molecules in fuel lines have been continuously studied in recent decades. However, scientific reports regarding the application of a magnetic field integrated with a gasoline vaporizer tube (GVT) on engine performance have not been widely discussed. Therefore, this article presents an investigation of the application of GVT with magnetic field on a single cylinder gasoline engine with three different fuel qualities, including RON88, RON92, and RON98. Torque, power, emissions and fuel consumption have been tested for scientific opinion. The results of our present investigation seem to confirm the claims of GVT inventors, where GVT increases engine torque and power, reduces CO and HC content in exhaust gases, and reduces fuel consumption. However, without considering the supply of gasoline and air from the GVT to the engine is an unfair analysis. In fact, although the established theories reveal the benefits of applying a magnetic field to the fuel line, in this case, only a small part of the fuel is induced by the magnetic field, outside the main line from the tank to the injectors. Finally, the results of this investigation provide new insights for potential users of GVT, which is currently commercially available.
1 October 2024 in Science and Technology Indonesia
Conventional epoxy coating for surface metal corrosion protection reported many unsolved technical problems. Adding filler in the epoxy could enhance the promising properties of the composite coating. Our work describes in detail the synthesizing and characterizing epoxy/carbon composite coating. Epoxy was mixed with thinner high gloss (HG) and hardener and stirred using a stirrer apparatus. After blending, various carbons were added (1 wt. %, 3 wt. %, and 5 wt. %) and then appropriately stirred. The different mixture composite was coated onto the steel plate cold rolled coiled (SPCC) plate using high-volume low-pressure (HVLP) in two passes. Various characterizations were performed, including crystallographic orientation, Infra-Red (IR)-spectra, surface morphology, thickness, hydrophobicity, hardness, and corrosion using X-ray diffraction (XRD), Fourier transform infrared (FTIR), Scanning electron microscopy (SEM), portable dry film coating thickness (DFT), digital camera, Vickers microhardness tester, and Potentiostat, respectively. More carbon micron-sized content led to elevate the peak intensity, surface bumpiness, and hydrophobicity. The uppermost external bumpiness and hydrophobicity values are 23.51 µm and 101◦. Hardness depends on carbon content and more carbon leads to an increase in the hardness of the composited coating. The highest average Vickers hardness value is 28.24 HV. The coating thickness influenced the corrosion rate, more coating thickness promoted lesser corrosion rate. The highest coating thickness (60.8 µm) promoted a corrosion rate of around 5.65×10−4 mmpy.
30 August 2024 in Journal of Advanced Research in Applied Mechanics
There are two types of two-wheeled vehicles when viewed from the transmission system: manual and automatic. The automatic transmission circuit on the automatic motor, the roller (ballast), is on the primary pulley. In the market, various rollers (weights) are sold, starting from those that are standard and different from the standard with lighter or heavier weight variations. However, there are also aftermarket rollers produced in several automotive industries, one of which is UNIONMATERIAL. The difference lies in the shape and materials used. This study aims to analyze the effect of variations in the shape of the roller on the characteristics of power transmission on automatic motorcycles. The type of vehicle used is a motorcycle produced in 2009 using a dyno test test with two test methods. The first test is from low engine speed ± 1400-1600 rpm to 9000 rpm, while the second test is from medium engine speed ± 4000 rpm to 9000 rpm. In addition, the fuel consumption test was also carried out. The variation used is a roller shape consisting of a round roller, a sliding roller, and a flying roller weighing 12 grams. The highest results obtained at a power of 0.7 HP occurred on the flying roller with 7.1 HP/ 3916 rpm, while the torque was 5.19 N.m on the flying roller (23.96 N·m/1250 rpm). There is an effect on fuel consumption, but not too significant. The biggest difference occurred in the engine parameter RPM 5000 of 0.1 between the flying roller (0.9 L/h) and sliding roller (0.9 L/h) with the round roller (1 L/h) - this happens because the shape of the flying roller is not cylindrical and more dynamic, which is adapted to the movable drive face. There is an additional wing on the roller weight. The data from the results of this study have implications for increasing vehicle performance without changing engine capacity, which requires large costs.
The big environmental problems faced today are caused by used packaging that is increasingly piling up. Unfortunately, not all of this waste can be easily decomposed, one example is used paint cans. The design of this spray paint refill machine aims to reduce paint can waste that is rampant in the community. In addition, this tool also serves to replenish liquid and also compressed air in spray paint cans which can later be reused in the painting process. The spray paint refill machine has a frame size with a length of 275 mm, a width of 250 mm, and a height of 440 mm using hollow iron measuring 20x20 mm which is carried out static load testing on the affected part of the working force of 15 N. Based on the results of static load analysis, it shows that the design of the engine frame is strong enough to withstand the force exerted and the test results of this tool the spray paint refill machine can work optimally and there are no obstacles when filling into the spray paint packaging.