Insulating polymeric foams have an important role to play in increasing energy efficiency and therefore contributing to combating climate change. Their development in recent years has been driven towards the reduction of thermal conductivity and achievement of the required mechanical properties as main targets towards sustainability. This perception of sustainability has overseen the choice of raw materials, which are often toxic, or has placed research efforts on optimizing one constituent while the other necessary reactants remain hazardous. The transition to the circular economy requires a holistic understanding of sustainability and a shift in design methodology and the resulting research focus. This paper identifies research needs and possible strategies for polymeric foam development compatible with Circular Product Design and Green Engineering, based on an extensive literature review. Identified research needs include material characterization of a broader spectrum of polymer melt–gas solutions, ageing behavior, tailoring of the polymer chains, detailed understanding and modeling of the effects of shear on cell nucleation, and the upscaling of processing tools allowing for high and defined pressure drop rates.

Maintaining the supply chain in every industry is an important concern for the operators. The negative impacts of inappropriate maintenance could be discussed from different perspectives as well as capital loss, reputation loss, hazard and risk for lives, etc. In recent years, District heating (DH) in the countries that employing this technology broadly, turned to a vital energy infrastructure for delivering heat from suppliers to the consumers. Therefore, the reliability of the system is of high importance for the public interest. The transition from reactive maintenance to proactive maintenance have improved a lot the reliability to the system. Currently, many industries are exploiting different forms of artificial intelligence (AI) to predict the failures and plan for interventions to increase the system efficiency. In this paper the different methods of predictive maintenance have been reviewed and the compatibility to apply on a DH network has been discussed.

District heating (DH) pre-insulated pipes are a sandwich assembly composed by a steel heat service pipe, polyurethane (PU) foam and polyethylene casing. The foam acts as bond between the steel pipe and casing. The application has high constraints for the foam, as it is subjected to cyclic multiaxial stresses, high cyclic temperatures and long expected service life. In this study, we evaluate if and how cyclic loads affect the shear strength, shear modulus, toughness and failure behaviour of the PU foam in DH pipes sandwich assembly compared with unaged reference samples. We have found that the simultaneous application of mechanical and thermal loads weakens the strength and increases the stiffness of the foam and that this change is not caused by degradation of the molecular structure. Crack initiation and propagation along the pipe samples follow a very consistent pattern between samples, with cracks initiating in Mode II and propagating in Mode I. The consistent axial displacement of approximately 2 cm from each other suggests the formation of strain localizations.