The appropriate uses of radiography, CT, and MR imaging for diagnosing, measuring, monitoring, and guiding management of idiopathic, congenital, and developmental scoliosis are discussed and illustrated. Scoliosis is defined as a lateral spinal curvature with a Cobb angle of 10° or more. This abnormal curvature may be the result of an underlying congenital or developmental osseous or neurologic abnormality, but in most cases the cause is unknown. Imaging modalities such as radiography, computed tomography (CT), and magnetic resonance (MR) imaging play pivotal roles in the diagnosis, monitoring, and management of scoliosis, with radiography having the primary role and with MR imaging or CT indicated when the presence of an underlying osseous or neurologic cause is suspected. In interpreting the imaging features of scoliosis, it is essential to identify the significance of vertebrae in or near the curved segment (apex, end vertebra, neutral vertebra, stable vertebra), the curve type (primary or secondary, structural or nonstructural), the degree of angulation (measured with the Cobb method), the degree of vertebral rotation (measured with the Nash-Moe method), and the longitudinal extent of spinal involveme...

Prospective study of 34 patients with thoracolumbar spinal fractures. To assess the reliability of magnetic resonance imaging (MRI) for posterior ligament complex injury in thoracolumbar spinal fractures. Some researchers have studied posterior ligament complex injury in spinal fracture using MRI. However, most did not evaluate the findings of MRI compared with the operative findings. Thirty-four patients with thoracolumbar spinal fracture were evaluated by palpation of the interspinous gap, plain radiography, and MRI before operation. In addition to conventional MRI sequences, a fat-suppressed T2-weighted sagittal sequence was performed. Surgery was performed by a posterior approach. During the operation, posterior ligament complex injury was carefully examined. A wide interspinous gap was palpated in 14 patients and was found in 21 patients on plain radiography. Magnetic resonance imaging raised suspicion of injury to the posterior ligament complex in 30 patients. According to interpretation of MRI, injury to the supraspinous ligament was suspected in 27 patients, the interspinous ligament in 30 patients, and the ligamentum flavum in 9 patients. There were 28 supraspinous ligament injuries, 29 interspinous ligament injuries, and 7 ligamentum flavum injuries in operative findings. There was a significant relation between MRI interpretation and operative findings. A fat-suppressed T2-weighted sagittal sequence of MRI was a highly sensitive, specific, and accurate method of evaluating posterior ligament complex injury. Based on the results of this study, a fat-suppressed T2-weighted sagittal sequence of MRIs is recommended for the accurate evaluation of posterior ligament complex injury and would be helpful in the selection of treatment options.

Patients with lumbar spinal stenosis (LSS) may experience neuropathic symptoms, such as back pain, radiating pain, and neurogenic claudication. Although the long-term outcomes of both nonsurgical and surgical treatments are similar, surgery may provide shortterm benefits, including improved symptoms and lower risk of falling. Decompression is mainly used for surgical treatment, and depending on the decompression degree and associated instability, combination therapy may be given. Minimally invasive surgery has been demonstrated to produce excellent results in the treatment of LSS. Thus, an approach aimed at understanding the overall pathophysiology and treatment methods of LSS is expected to have a better therapeutic effect.

Study Design. A finite element analysis. Objective. To investigate the association between the position of an inserted pedicle screw and the corresponding facet contact force or intradiscal pressure. Summary of Background Data. Although superior facet joint violation by pedicle screws is not an uncommon occurrence in instrumented lumbar fusion surgery, its actual biomechanical significance is not well understood. Furthermore, the association between the position of the pedicle screw and the stress on the corresponding disc/facet joint has yet to be investigated. Methods. According to the positions of pedicle screws in L4 of the L4–L5 lumbar fusion, 4 L4–L5 fusion models were simulated. These models included the violation of both L3–L4 superior facet joints by pedicle screws (facet joint violation [FV] model), the nonencroachment of both L3–L4 superior facet joints by pedicle screws (facet joint preservation [FP] model), and the removal state of pedicle screws in the FV model (removal of violated pedicle screws [rFV] model). The facet joint contact [FC] model represented the scenario in which the pedicle screws did not encroach upon either facet joint but were inserted close to the L3–L4 facet joint surface. Moreover, the uninstrumented fusion [UF] model represented the uninstrumented L4–L5 fusion. In each scenario, the intradiscal pressures and facet contact forces at the L2–L3 and L3–L4 segments were analyzed under extension and torsion moments. Results. The FV model yielded the greatest increases in facet contact force and intradiscal pressure at the L3–L4 segment under extension and torsion moments. Following the FV model, the increases in intradiscal pressure and facet contact force were the second highest in the FC model followed by the FP model. Furthermore, the rFV model represented prominent reductions of previously increased facet contact force and intradiscal pressure at the L3–L4 segment. Conclusion. In models of 1-segment lumbar fusion surgery, the positions of pedicle screws were closely linked with corresponding disc stresses and facet contact forces. However, even in cases of facet violation by pedicle screws, removal of the pedicle screw after fusion completion can reduce facet contract forces and disc stresses under both extension and torsional moments.

Study Design. A nonhuman primate lumbar intertransverse process arthrodesis model was used to evaluate modifications to a plain collagen sponge to deliver recombinant human bone morphogenetic protein-2 (rhBMP-2). Objectives. To evaluate the feasibility of enhancing the delivery of rhBMP-2 with the established collagen sponge carrier by adding biphasic ceramic phosphate (BCP) granules (15% hydroxyapatite, 85% tricalcium phosphate) or allograft chips to provide compression resistance for posterolateral spine arthrodesis. Summary of Background Data. Recombinant human bone morphogenetic protein-2 was successfully delivered with a resorbable collagen sponge in a rabbit intertransverse process fusion model. Success in nonhuman primates required a higher dose (6–9 mg) of rhBMP-2 and a more compression-resistant matrix (ceramic) than plain collagen. The limitation of the ceramic carrier was its radiopacity, which made radiographic detection of new bone formation difficult. Methods. Nine adult rhesus monkeys underwent bilateral posterolateral intertransverse process arthrodesis at L4-L5. The animals were divided into three groups (n = 3 each) based on the graft material implanted: 1) autogenous iliac crest bone (5 cm³/side); 2) collagen sponge and 15:85 BCP granules loaded with rhBMP-2 (3 mg/side); and, 3) collagen sponge and allograft chips loaded with rhBMP-2 (3 mg/side). The monkeys were killed 24 weeks after surgery. Inspection, manual palpation, radiography, computed tomographic scans, and histology were used to assess fusion. Results. All six monkeys with rhBMP-2 delivered in the collagen/15:85 BCP carrier and the collagen/allograft chips carrier achieved solid spine fusions, whereas only one of three animals fused with autogenous bone graft. Histologic analysis of the bone induced by rhBMP-2 showed normal trabecular bone and bone marrow elements. Conclusions. The addition of either 15:85 BCP granules or allograft bone chips to the existing resorbable collagen sponge matrix enhanced delivery of rhBMP-2 in the posterolateral spine. The combination matrices were more compression resistant and had improved radiographic resorption properties that permitted easy radiographic visualization of new bone. In addition, a lower dose of rhBMP-2 (3 mg/side) was successful compared with the dose previously used with the plain collagen sponge (6 mg/side).

A prospective case control study. To investigate the risk of a fall by using functional mobility tests in patients with lumbar spinal stenosis (LSS) via a comparison with patients with knee osteoarthritis (KOA). LSS is a degenerative arthritic disease in the spine that results in decreasing function, impaired balance, and gait deficit, with increased levels of leg and back pain. This physical impairment may result in an increased risk of fall later in the disease process, as shown in KOA. However, there has been no study regarding the association between the risk of a fall and LSS. The study was an age- and weight-matched case control study consisting of two groups: one group consisting of 40 patients with LSS who were scheduled to undergo spine surgery (LSS group) and the other group consisting of 40 patients with advanced osteoarthritis in both knees, scheduled to undergo TKA on both knees (KOA group). For both groups, four functional mobility tests, such as a Six-Meter-Walk Test (SMT), Sit-to-Stand test (STS), Alternative-Step Test (AST), and Timed Up and Go Test (TUGT), were performed. There was no difference in demographic data between both groups except for body mass index. For the SMT and STS, the patients in the LSS group spent significantly more time performing these tests than the patients in the KOA. For the AST, however, patients in the KOA group presented a statistically worse performance in functional mobility, compared with the LSS group. The mean TUGT time was not statistically different between the two groups. The current study highlights that patients with symptomatic LSS have a risk of a fall comparable with the patients who had degenerative KOA based on the results of functional mobility tests (SMT, STS, AST, and TUGT).