Self-healing asphalt with encapsulated rejuvenators is a promising technology to improve the service life of asphalt pavements. Broken capsules reduce the viscosity of aged bitumen due to rejuvenator diffusion, sealing open microcracks at an early stage. Several waste oils have been used as low-cost rejuvenating agents in capsule production to reduce costs and enable the environmental benefits of this technology. This study aims to evaluate the effects of capsules containing waste vegetable oil (WVO) and waste mineral oil (WMO) on the mechanical properties of hot mix asphalt (HMA). Four capsule content amounts (0.25%, 0.50%, 0.70%, and 1.00% by weight) were included in HMA samples, which were evaluated through experimental standard tests such as stiffness modulus, indirect tensile strength, fatigue life, and moisture-induced damage. The results revealed that an increase in capsule content led to less rigidity and strength against permanent deformation and fatigue. It was also determined that the strength against permanent deformation of mixtures with WMO capsules increased more than that of mixtures with WVO capsules. Another finding is that the optimum capsule content ratio in asphalt mixtures is 0.50% by weight for both capsule types.
4 August 2022 in Arabian Journal for Science and Engineering
In recent years, there have been unprecedented developments in artificial intelligence. Object detection, voice recognition, face recognition etc. are some of the artificial intelligence applications. In this study, an auxiliary method for the automatic detection of cracks, one of the main deterioration problems on highways, is proposed. The crack formation of hot mix asphalts is investigated with an image processing method modeled with Attention SegNet architecture. Styrene-butadiene-styrene (SBS), the most widely used additive in bitumen modification, was used at 2 %, 3 %, and 4 % ratios to modify 50/70 bitumen. Semi-circular asphalt specimens obtained with SBS modified bitumen were subjected to a semicircular bending (SCB) test and fracture performance was investigated. The effects of different temperature, notch size and additive on crack detection performance are evaluated. In the experimental study, maximum load, fracture energy, fracture toughness (KIC) values were obtained at low temperature, and resistance values against crack propagation were obtained by applying the J-integral method at intermediate temperature. The results demonstrated that with the addition of SBS, the fracture strength and maximum load values increased at each temperature value, with the 4 % SBS mixture offering the highest performance. Moreover, the image segmentation performed with SegNet provided high accuracy and precision values for cracks. It was observed that the accuracy values of the image processing methods decreased at low temperature, while at high temperature, higher accuracy values were obtained as the cracking rate.