The current interior design scope places high demands on acoustic treatment manufacturers. The state of the art does not provide satisfactory material proposals for architects to satisfy design needs. There is a need for a novel approach concerning decorative, recognized materials that adapts them to the acoustic surface properties. The final design proposed in this study presents a modern functional solution with high acoustic properties, which can be produced with sustainable materials such as FSC wood and has a low environmental impact because of its low waste production. This research presents the complete design process of a novel type of wooden acoustic panel. A comprehensive explanation of the scientific development is covered, including basic material testing in an impedance tube, FEM simulations of the initial designs, and final measurements in a reverberation chamber. The solution’s novelty is based on the optimized placement of the perforation holes on the surface of a wooden overlay using a ship deck optimization algorithm. The methods used cover the original solution of mixing FEM modeling of the surface impedance with the application of the Jeong–Thomasson correction for random incidence sound absorption coefficient simulation. The contribution of this research is the development of wooden perforated panels with Class A sound absorption and an overall depth of 90 mm, including the 50 mm depth of the backing material. The discussion will explain the difficulties of working with this material and the need for a combination of the aesthetic and acoustic sides of the project.
This manuscript describes the application of novel hybrid acoustic panels with variable acoustic properties that could be used in the design process. Despite the significant growth in the modern acoustic absorbing and diffusing panel sector in recent years, there is still a need for sustainable and original designs that will fit standard interior design trends. The most significant requirement is satisfying the design needs of variable acoustic venues. The availability of acoustic panels with variable properties is minimal, as most designs are based on textiles in the form of rolling banners; therefore, there is no market diversity. The current paper presents an original solution for a novel perforated wooden panel based on third-degree-of-freedom curves. Due to the possibility of exchanging the front panel, the acoustic surface can be varied and adjusted to the room considering different requirements for the acoustic climate, for example, by modifying the attenuation range from low to mid–high frequencies. The novel panels have unique esthetic properties with functional acoustic features regarding sound diffusion and absorption. In this paper, sound absorption and diffusion measurements will be presented for the different variants of the panels, presenting the option to modify the parameters to adjust the panel’s features to the room’s needs. In situ acoustic measurements in a laboratory were conducted to test the variable acoustic panels’ influence on the room’s acoustic parameters, such as T30 and C80. In summary, the advantages of this kind of design will be discussed, alongside the possible impact on modern construction materials’ utilization in architecture.