This study investigates the effects of aging and recycling on the optical properties of paperboard, which is key to advancing circular economy practices in packaging. Methods included deinking flotation of cardboard made from sea algae and eco-conventional cardboard of unexposed and exposed samples in a xenon test chamber. Optical measurements were performed on the obtained laboratory paper sheets. Measurements for the chromatic coefficients ΔL*, Δa* and Δb*, as well as the CIE whiteness from comparison of the fluorescent component in the cardboard, were carried out under two light sources, D65 and UV. Regression analysis was used to quantify the statistical significance of these changes over time, i.e., in the aging process. The results revealed significant effects of both aging and recycling on the chromatic coefficients, with ΔL* and Δa* decreasing, while Δb* initially increased before decreasing. The influence of the fluorescent component is reduced by recycling the samples. Opacity measurements showed an initial increase in values that decreased with the aging of the samples, which indicates structural changes in the material. This research contributes to the circular economy by providing insight into the durability and optical properties of recycled cardboard, helping to develop sustainable packaging solutions.

The research aims to find out the crucial factors in the design phase of packaging products, which are related to the determination of environmental influences on sustainable materials. The paper presents the results of research into the influence of environmentally friendly cardboard and the separation of yellow offset ink on the optical properties of prints exposed to thermal aging without and with exposure to NO₂. The samples were obtained under real conditions on a Roland 705 printing machine. The colorimetric characteristics of the print and its stability were determined in the research. The research is significant for graphic reproduction in the domain of testing the quality of the print itself, which is defined by certain raster characteristics. The research covers prints in 100%, 70% RTV, 50% RTV, and 30% RTV. The intensity of the tonal experience will depend on the interaction of the substrate with the raster and different types of inks in offset printing as a function of the experimental conditions. The ink characteristics of prints ∆L*, ∆a*, ∆b*, and ∆E were determined. The research results show that ink I1, with about 80% renewable raw materials, achieves the best stability under the specified experimental conditions.