World copper (Cu) production has been strongly affected by arsenic (As) content, because As-rich Cu concentrates are not desirable in the metal foundries. When As-rich Cu concentrates are processed by smelting they release As as volatile compounds into the atmosphere and inside furnaces, generating serious risks to human health. In recent years, exports of Cu concentrates are being penalized for the increasingly high As content of the ores, causing economies that depend on the Cu market to be seriously harmed by this impurity. In the last few decades, biohydrometallurgy has begun to replace the traditional Cu sulfide processing, however bioleaching processes for As-bearing Cu ores which contain enargite are still in the development stage. Researchers have not yet made successful progress in enargite bioleaching using typical mesophilic and thermophilic bacteria that oxidize sulfide. New approaches based on direct oxidative/reductive dissolution of As from enargite could result in significant contributions to Cu biohydrometallurgy. Thus, As-rich Cu concentrates could be pre-treated by bioleaching, replacing current technologies like roasting, pressure leaching and alkaline leaching by selective biological arsenite oxidation or arsenate reduction. In this article, we review the As problem in Cu mining, conventional technologies, the biohydrometallurgy approach, and As bioleaching as a treatment alternative.
The occurrence of toxic metal(loid)s in surface freshwater is a global concern due to its impacts on human and ecosystem health. Conceptual and quantitative metal(loid) models are needed to assess the impact of metal(loid)s in watersheds affected by acid rock drainage. Few case studies have focused on arid and semiarid headwaters, with scarce hydrological and hydrochemical information. This work reports the use of WASP8 (US EPA) to model Al, Fe, As, Cu, and SO42− concentrations in the Upper Elqui River watershed in north–central Chile. Calibrated model performance for total concentrations was “good” (25.9, RRMSE; 0.7, R2-d) to “very good” (0.8–0.9, R2-d). The dissolved concentrations ranged between “acceptable” (56.3, RRMSE), “good” (28.6, RRMSE; 0.7 d), and “very good” (0.9, R2-d). While the model validation achieved mainly “very good” (0.8–0.9, R2-d) predictions for total concentrations, the predicted dissolved concentrations were less accurate for all indicators. Sensitivity analysis showed that the partition coefficient is a sensitive constant for estimating dissolved concentrations, and that integrating sorption and sediment interaction reduces the model error. This work highlights the need for detailed and site-specific information on the reactive and hydrodynamic properties of suspended solids, which directly impact the partition coefficient, sedimentation, and resuspension velocity calibration.