Objective: Overhead tasks are a primary inducement to work-related musculoskeletal disorders. Aiming to reduce shoulder physical loads, passive shoulder exoskeletons are increasingly prevalent in the industry due to their lightweight, affordability, and effectiveness. However, they can only handle specific tasks and struggle to balance compactness with a sufficient range of motion effectively. Method: We proposed a novel passive occupational shoulder exoskeleton designed to handle various overhead tasks at different arm elevation angles, ensuring sufficient ROM while maintaining compactness. By formulating kinematic models and simulations, an ergonomic shoulder structure was developed. Then, we presented a torque generator equipped with an adjustable peak assistive torque angle to switch between low and high assistance phases through a passive clutch mechanism. Ten healthy participants were recruited to validate its functionality by performing the screwing task. Results: Measured range of motion results demonstrated that the exoskeleton can ensure a sufficient ROM in both sagittal (164$^{\circ }$) and horizontal (158$^{\circ }$) flexion/extension movements. The experimental results of the screwing task showed that the exoskeleton could reduce muscle activation (up to 49.6$\%$), perceived effort and frustration, and provide an improved user experience (scored 79.7 out of 100). Conclusion: These results indicate that the proposed exoskeleton can guarantee natural movements and provide efficient assistance during overhead work, and thus have the potential to reduce the risk of musculoskeletal disorders. Significance: The proposed exoskeleton provides insights into multi-task adaptability and efficient assistance, highlighting the potential for expanding the application of exoskeletons.

Prolonged awkward arm postures and repetitive tasks in industrial environments can easily lead to worker injuries. The occupational shoulder exoskeleton is a promising solution to reducing the incidence of work-related musculoskeletal disorders, especially in the shoulder. In general, the device has to be compatible with the human shoulder, which is one of the most complex joints, thus posing significant challenges in existing efforts to design occupational shoulder exoskeletons. The purpose of this paper is to present a comprehensive review of exoskeletons designed to support human shoulders and arms in industrial applications. Recent developments and advancements in mechanism design, actuators, and control aspects are discussed in detail. A brief overview of the evaluation (i.e., participants, task design, objective, and subjective assessment) is also reported, and the experiment protocol to assess performance is summarized. Finally, existing challenges and possible future research directions for occupational shoulder exoskeletons are provided.

The main objective of this article is to solve the trajectory following problem for lower limb exoskeleton robot by using a novel adaptive robust control method. The uncertainties are considered in lower limb exoskeleton robot system which include initial condition offset, joint resistance, structural vibration, and environmental interferences. They are time-varying and have unknown boundaries. We express the trajectory following problem as a servo constraint problem. In contrast to conventional control methods, Udwadia–Kalaba theory does not make any linearization or approximations. Udwadia–Kalaba theory is adopted to derive the closed-form constrained equation of motion and design the proposed control. We also put forward an adaptive law as a performance index whose type is leakage. The proposed control approach ensures the uniform boundedness and uniform ultimate boundedness of the lower limb exoskeleton robot which are demonstrated via the Lyapunov method. Finally, simulation results have shown the tracking effect of the approach presented in this article.

In this study, we design an embedded surface EMG acquisition device to conveniently collect human surface EMG signals, pursue more intelligent human–computer interactions in exoskeleton robots, and enable exoskeleton robots to synchronize with or even respond to user actions in advance. The device has the characteristics of low cost, miniaturization, and strong compatibility, and it can acquire eight-channel surface EMG signals in real time while retaining the possibility of expanding the channel. This paper introduces the design and function of the embedded EMG acquisition device in detail, which includes the use of wired transmission to adapt to complex electromagnetic environments, light signals to indicate signal strength, and an embedded processing chip to reduce signal noise and perform filtering. The test results show that the device can effectively collect the original EMG signal, which provides a scheme for improving the level of human–computer interactions and enhancing the robustness and intelligence of exoskeleton equipment. The development of this device provides a new possibility for the intellectualization of exoskeleton systems and reductions in their cost.

The main objective of this paper is to handle the trajectory tracking control for a class of three-wheel mobile robot by using a novel adaptive robust control. The mobile robot consists of nonholonomic constraints and uncertainties. The uncertainties include initial condition offset, mass, and moment of inertia of the system, which are time-varying and bounded (unknown). The control force in analytical form is obtained by UK theory, and the adaptive robust control is formulated to handle the uncertainties. For estimating the unknown bounds of uncertainties, the leakage-type adaptive law is designed, which can automatically adjust its own value according to the trajectory tracking errors. Then we verify the uniform boundedness and uniform ultimate boundedness of the proposed control by Lyapunov method. Finally, numerical simulations are conducted to show the trajectory tracking effectiveness of the designed control method.