The effects of an axial rotation on the turbulent convective flow because of an adverse temperature gradient in a water-filled upright cylindrical vessel are investigated. Both direct numerical simulations and experiments applying stereoscopic particle image velocimetry are performed. The focus is on the gathering of turbulence statistics that describe the effects of rotation on turbulent Rayleigh–Bénard convection. Rotation is an important addition, which is relevant in many geophysical and astrophysical flow phenomena.A constant Rayleigh number (dimensionless strength of the destabilizing temperature gradient) Ra = 109 and Prandtl number (describing the diffusive fluid properties) σ = 6.4 are applied. The rotation rate, given by the convective Rossby number Ro (ratio of buoyancy and Coriolis force), takes values in the range 0.045 ≤ Ro ≤ ∞, i.e. between rotation-dominated flow and zero rotation. Generally, rotation attenuates the intensity of the turbulence and promotes the formation of slender vertical tube-like vortices rather than the global circulation cell observed without rotation. Above Ro ≈ 3 there is hardly any effect of the rotation on the flow. The root-mean-square (r.m.s.) values of vertical velocity and vertical vorticity show an increase when Ro is lowered below Ro ≈ 3, which may be an indication of the activation of the Ekman pumping mechanism in the boundary layers at the bottom and top plates. The r.m.s. fluctuations of horizontal and vertical velocity, in both experiment and simulation, decrease with decreasing Ro and show an approximate power-law behaviour of the shape Ro0.2 in the range 0.1 ≲ Ro ≲ 2. In the same Ro range the temperature r.m.s. fluctuations show an opposite trend, with an approximate negative power-law exponent Ro−0.32. In this Rossby number range the r.m.s. vorticity has hardly any dependence on Ro, apart from an increase close to the plates for Ro approaching 0.1. Below Ro ≈ 0.1 there is strong damping of turbulence by rotation, as the r.m.s. velocities and vorticities as well as the turbulent heat transfer are strongly diminished. The active Ekman boundary layers near the bottom and top plates cause a bias towards cyclonic vorticity in the flow, as is shown with probability density functions of vorticity. Rotation induces a correlation between vertical vorticity and vertical velocity close to the top and bottom plates: near the top plate downward velocity is correlated with positive/cyclonic vorticity and vice versa (close to the bottom plate upward velocity is correlated with positive vorticity), pointing to the vortical plumes. In contrast with the well-mixed mean isothermal bulk of non-rotating convection, rotation causes a mean bulk temperature gradient. The viscous boundary layers scale as the theoretical Ekman and Stewartson layers with rotation, while the thermal boundary layer is unaffected by rotation. Rotation enhances differences in local anisotropy, quantified using the invariants of the anisotropy tensor: under rotation there is strong turbulence anisotropy in the centre, while near the plates a near-isotropic state is found.
Rotating Rayleigh–Bénard convection is a simple model system used to study the interplay of buoyant forcing and rotation. Many recent studies have focused on the geostrophic regime of turbulent rotating convection where the principal balance of forces is between the Coriolis force and the pressure gradient. This regime is believed to be representative of conditions in geophysical and astrophysical flows. We hope to be able to extrapolate findings from laboratory experiments and numerical simulations towards these large-scale natural flows. In this paper I sketch the phase diagram of the geostrophic regime of rotating convection, put experimental and numerical studies in their place in these diagrams and discuss the partitioning into subranges characterised by different flow structures and heat transfer scaling. I also discuss some complications faced by experimentalists, such as constraints on the dimensions of the convection cell, wall modes near the sidewall and centrifugal buoyancy.
4 July 2018 in Geophysical & Astrophysical Fluid Dynamics
Many geophysical and astrophysical phenomena are driven by turbulent fluid dynamics, containing behaviors separated by tens of orders of magnitude in scale. While direct simulations have made large strides toward understanding geophysical systems, such models still inhabit modest ranges of the governing parameters that are difficult to extrapolate to planetary settings. The canonical problem of rotating Rayleigh-Bénard convection provides an alternate approach - isolating the fundamental physics in a reduced setting. Theoretical studies and asymptotically-reduced simulations in rotating convection have unveiled a variety of flow behaviors likely relevant to natural systems, but still inaccessible to direct simulation. In lieu of this, several new large-scale rotating convection devices have been designed to characterize such behaviors. It is essential to predict how this potential influx of new data will mesh with existing results. Surprisingly, a coherent framework of predictions for extreme rotating convection has not yet been elucidated. In this study, we combine asymptotic predictions, laboratory and numerical results, and experimental constraints to build a heuristic framework for cross-comparison between a broad range of rotating convection studies. We categorize the diverse field of existing predictions in the context of asymptotic flow regimes. We then consider the physical constraints that determine the points of intersection between flow behavior predictions and experimental accessibility. Applying this framework to several upcoming devices demonstrates that laboratory studies may soon be able to characterize geophysically-relevant flow regimes. These new data may transform our understanding of geophysical and astrophysical turbulence, and the conceptual framework developed herein should provide the theoretical infrastructure needed for meaningful discussion of these results.
Turbulent rotating convection in a cylinder is investigated both numerically and experimentally at Rayleigh number Ra = 109 and Prandtl number � = 6.4. In this Letter we discuss two topics: the breakdown under rotation of the domain-filling large-scale circulation (LSC) typical for confined convection, and the convective heat transfer through the fluid layer, expressed by the Nusselt number. The presence of the LSC is addressed for several rotation rates. For Rossby numbers Ro . 1.2 no LSC is found (the Rossby number indicates relative importance of buoyancy over rotation, hence small Ro indicates strong rotation). For larger Rossby numbers a precession of the LSC in anticyclonic direction (counter to the background rotation) is observed. It is shown that the heat transfer has a maximal value close to Ro = 0.18 being about 15% larger than in the non-rotating case Ro = 1. Since the LSC is no longer present at this Rossby value we conclude that the peak heat transfer is independent of the LSC.
Rotating Rayleigh–Bénard convection, the flow in a rotating fluid layer heated from below and cooled from above, is used to analyse the transition to the geostrophic regime of thermal convection. In the geostrophic regime, which is of direct relevance to most geo- and astrophysical flows, the system is strongly rotating while maintaining a sufficiently large thermal driving to generate turbulence. We directly simulate the Navier–Stokes equations for two values of the thermal forcing, i.e. $Ra=10^{10}$ and $Ra=5\times 10^{10}$ , at constant Prandtl number $Pr=1$ , and vary the Ekman number in the range $Ek=1.3\times 10^{-7}$ to $Ek=2\times 10^{-6}$ , which satisfies both requirements of supercriticality and strong rotation. We focus on the differences between the application of no-slip versus stress-free boundary conditions on the horizontal plates. The transition is found at roughly the same parameter values for both boundary conditions, i.e. at $Ek\approx 9\times 10^{-7}$ for $Ra=1\times 10^{10}$ and at $Ek\approx 3\times 10^{-7}$ for $Ra=5\times 10^{10}$ . However, the transition is gradual and it does not exactly coincide in $Ek$ for different flow indicators. In particular, we report the characteristics of the transitions in the heat-transfer scaling laws, the boundary-layer thicknesses, the bulk/boundary-layer distribution of dissipations and the mean temperature gradient in the bulk. The flow phenomenology in the geostrophic regime evolves differently for no-slip and stress-free plates. For stress-free conditions, the formation of a large-scale barotropic vortex with associated inverse energy cascade is apparent. For no-slip plates, a turbulent state without large-scale coherent structures is found; the absence of large-scale structure formation is reflected in the energy transfer in the sense that the inverse cascade, present for stress-free boundary conditions, vanishes.