The insulation state of high-voltage cables in coal mines directly influences the reliability of power supply in coal mines and the level of safe production. In this paper, the degradation mechanism of cable insulation is analyzed, and an online monitoring technology of cable insulation in coal mines based on decision tree is proposed, the technical principle of the judgment method of cable degradation based on decision tree is studied, the feasibility of this technology is verified through simulation, the existing online monitoring solutions for cable insulation are analyzed, and a wide-area synchronous measurement and monitoring system for cable insulation is designed. This technology has been applied in Chinese coal mine enterprises in China and achieved a good effect.
Based on the composite shaft lining structure, the research on the electromagnetic and negative pressure coupling adsorption technology of wall–climbing robots is of great significance to improve the level of safety monitoring during the construction and service of coal mine shafts. On the basis of theoretical research and computational data, the numerical simulation and simulation experiments of the coupled adsorption system of a wall–climbing robot are conducted in this research. In the ANSA software environment, of experimental models and experimental environments of electromagnetic and negative pressure adsorption devices are constructed to investigate, parameters such as air flow and the law behavior of fan pressure under different system conditions, including negative pressure and varying fan speeds. The intensity distribution of the magnetic flux inside the electromagnetic circuit under different working conditions and the law of change in the direction of movement are explored. Furthermore, the power consumption and power increment of the electromagnetic and negative pressure adsorption system under the same adsorption force output are compared and analyzed. Based on the experimental results, a series of conclusions are verified; firstly the negative pressure of the system should be formed under certain basic specific fundamental conditions; secondly, the main velocity of the negative pressure adsorption system and the full pressure of the fan are determined by the internal and external pressure difference and the fan speed, respectively; lastly, the adsorption efficiency of electromagnetic adsorption is significantly higher than that of negative pressure adsorption. These research findings are expected to introduce a new technical means approach for the safety monitoring of vertical shafts and shafts in coal mines, thereby demonstrating the theoretical significance and practical value of the application and development of an underground multi–scenario robot automation system in coal mines.
The working conditions and environment of coal mine shafts are intricate and special. Currently, manual inspections or fixed-point monitoring is generally applied for daily safety monitoring, and intelligent and automated inspection equipment and its supporting technologies are not available. Starting from the technical requirements of the electromagnetic adsorption device of the wall-climbing robot for safety monitoring of the coal mine shaft, based on the structural characteristics and chemical composition of the composite shaft lining of the coal mine, the fundamental structure of the electromagnetic array and the electromagnetic unit are clarified, and a multi-layer matrix simulation point overlap mapping analysis method is proposed. Based on the system modeling and simulation calculations in MATLAB software, the number and distribution law of effective mapping points between the endpoints of the electromagnetic array and the reinforced frame in the shaft lining are inferred, which leads to the establishment of a calculation model of the equivalent adsorption area. The NSGA-II algorithm, a non-dominant elite strategy based on a genetic algorithm, is used to calculate the optimum combination scheme of various genetic parameters of individual electromagnetic units. Through the statistical analysis of the optimal individual data of each generation in the iterative process, the accuracy of the algorithm process and constraints, as well as the fitness function, are verified. Based on the research results of this paper, the electromagnetic adsorption issue of the mine shaft wall-climbing robot on the composite shaft lining structure has been effectively solved, which has theoretical significance and practical value for improving the autonomous ability and monitoring level of coal mine shaft safety monitoring.
With the rapid growth in coal demands driven by economic development, the applications scenarios of long-distance, high-power mining operations in underground coal mines has gradually been expanded. Taking voltage regulation technology for long-distance power supply in underground coal mines as the research object, this paper analyzed the mechanisms behind voltage fluctuation hazards and the status quo of existing voltage regulation technologies in coal mines and put forward a voltage regulation technology for long-distance power supply in tunneling faces of coal mines based on on-load voltage regulation. On this basis, a voltage regulation device for long-distance power supply in underground coal mines was designed and applied to the long-distance power supply system of Wanli Coal Mine’s tunneling faces. All indicators met the design requirements, validating the effectiveness of the device and the applicability of the research outcomes, and providing an effective solution for addressing voltage fluctuations in the long-distance power supply of underground coal mines.