In this study, a new formulation of low-cost, biodegradable, and non-toxic biosurfactant by Candida sphaerica UCP 0995 was investigated. The study was conducted in a bioreactor on an industrial waste-based medium, and a central composite rotatable design was used for optimization. The best results, namely a 25.22 mN/m reduction in surface tension, a biosurfactant yield of 10.0 g/L, and a critical micelle concentration of 0.2 g/L, were achieved in 132 h at an agitation speed of 175 rpm and an aeration rate of 1.5 vvm. Compositional and spectroscopic analyses of the purified biosurfactant by chemical methods, Fourier transform infrared spectroscopy, and nuclear magnetic resonance suggested that it is a glycolipid-type biosurfactant, and it showed no cytotoxicity in the MTT assay. The biosurfactant, submitted to different formulation methods as a commercial additive, remained stable for 120 days at room temperature. Tensioactive properties and stability were evaluated at different pH values, temperatures, and salt concentrations. The biosurfactant obtained with all formulation methods demonstrated good stability, with tolerance to wide ranges of pH, temperature and salinity, enabling application under extreme environmental conditions. Bioremediation tests were performed to check the efficacy of the isolated biosurfactant and the selected microbial species in removing oil from soil. The results demonstrated that the biosurfactant produced has promising properties as an agent for the bioremediation of contaminated soil.

Industrial interest in surfactants of microbial origin has intensified recently due to the characteristics of these compounds, such as biodegradability and reduced toxicity, and their efficiency in removing heavy metals and hydrophobic organic compounds from soils and waters. The aim of this study was to produce a biosurfactant using Candida bombicola URM 3712 in a low-cost medium containing 5.0% molasses, 3.0% corn steep liquor and 2.5% residual frying oil for 144 h at 200 rmp. Measurements of engine oil tension and emulsification were made under extreme conditions of temperature (0 °C, 5 °C, 70 °C, 100 °C and 120 °C), pH (2–12) and NaCl concentrations (2–12), demonstrating the stability of the biosurfactant. The isolated biosurfactant was characterized as an anionic molecule with the ability to reduce the surface tension of water from 72 to 29 mN/m, with a critical micellar concentration of 0.5%. The biosurfactant had no toxic effect on vegetable seeds or on Eisenia fetida as a bioindicator. Applications in the removal of heavy metals from contaminated soils under dynamic conditions demonstrated the potential of the crude and isolated biosurfactant in the removal of Fe, Zn and Pb with percentages between 70 and 88%, with the highest removal of Pb being 48%. The highest percentage of removal was obtained using the cell-free metabolic liquid, which was able to remove 48, 71 and 88% of lead, zinc and iron from the soil, respectively. Tests in packed columns also confirmed the biosurfactant’s ability to remove Fe, Zn and Pb between 40 and 65%. The removal kinetics demonstrated an increasing percentage, reaching removal of 50, 70 and 85% for Pb, Zn and Fe, respectively, reaching a greater removal efficiency at the end of 24 h. The biosurfactant was also able to significantly reduce the electrical conductivity of solutions containing heavy metals. The biosurfactant produced by Candida bombicola has potential as an adjuvant in industrial processes for remediating soils and effluents polluted by inorganic contaminants.

Surfactants can be used as nanoparticle stabilizing agents. However, since synthetic surfactants are not economically viable and environmentally friendly, biosurfactants are emerging as a green alternative for the synthesis and stabilization of nanoparticles. Nanoparticles have been applied in several areas of industry, such as the production of biomedical and therapeutic components, packaging coating, solar energy generation and transmission and distribution of electrical energy, among others. The aim of this study was to synthesize, in a simple and green way, silver nanoparticles (AgNPs) using the biosurfactant produced by Candida lipolytica UCP 0899 as a stabilizer. AgNPs were examined and morphologically characterized using the techniques of ultraviolet–visible spectroscopy (UV–visible), scanning electron microscopy (SEM), zeta potential and energy dispersive X-ray spectroscopy (EDS). Newly formed silver nanoparticles showed a maximum UV–visible absorption peak at 400 nm, while a shift to 410 nm was observed in those stored for 120 days. SEM micrograph confirmed the formation of nanoparticles with an average size of 20 nm and with a predominant spherical structure, while a zeta potential of −60 mV suggested that the use of the biosurfactant promoted their stability. Stabilized nanoparticles were tested for their antimicrobial activity against bacterial isolates of Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli and Enterobacter sp., as well as fungal isolates of Candida albicans and Aspergillus niger. At a concentration of 16.50 µg/mL, AgNPs inhibited the growth of all target microorganisms according to the following decreasing order: E. coli (95%), S. aureus, C. albicans (90%), A. niger (85%), Enterobacter sp. (75%) and P. aeruginosa (71%). These results suggest the potential use of the biosurfactant as a stabilizer of silver nanoparticles as an antimicrobial agent in different industrial sectors. Furthermore, the in vivo toxicity potential of biosurfactants was evaluated using the Tenebrio molitor model. The larvae were treated with concentrations in the range of 2.5, 5.0 and 10 g/L, and no mortality was observed within the 24 to 72 h period, demonstrating non-toxicity within the tested concentration range. These findings support the safety, efficacy and non-toxicity of biosurfactant-stabilized nanoparticles.

Biosurfactants are a group of environmentally friendly amphiphilic molecules that are applicable in numerous industries as essential biotechnology products, such as food production, cleaning products, pharmacology, cosmetics, pesticides, textiles and oil and gas fields. In this sense, and knowing the potential of these biomolecules, the aim of this work was to produce a biosurfactant, characterize it regarding its chemical and surfactant properties and investigate its potential in the removal of contaminants and in the cleaning of cotton fabrics. The biosurfactant was initially obtained from the cultivation of the microorganism Candida glabrata UCP 1002 in medium containing distilled water with 2.5% residual frying oil, 2.5% molasses and 2.5% corn steep liquor agitated at 200 rpm for 144 h. The biosurfactant reduced the surface tension of water from 72 to 29 mN/m. The toxicity potential of the biosurfactant was evaluated using Tenebrio molitor larvae and demonstrated non-toxicity. The biosurfactant was applied as a degreaser of engine oil on cotton fabric, and showed 83% (2× CMC), 74% (1× CMC) and 78% (1/2× CMC) oil removal. Therefore, the biosurfactant produced in this work has promising surfactant and emulsifying properties with potential for application in various industrial segments.