The reflection and transmission characteristics of a high-birefringence fiber loop mirror (HiBi-FLM), which is composed of a standard fiber coupler and one-section or multisection high-birefringence fibers (HBFs), are analyzed and discussed in detail. Theoretical reflectivity and transmissivity expressions for HiBi-FLMs with one-, two-, and three-section HBFs were obtained. The procedure for calculating reflectivity and transmissivity for HiBi-FLMs with n-section HBFs is given. Experimental results have verified the theoretical model. The basic characteristics of the one-section HiBi-FLM when strain and high temperature are applied to HBFs were analyzed and investigated theoretically and experimentally. The experimental results are in good agreement with the theoretical analysis. Furthermore, a strain– temperature sensor that makes use of those characteristics, which is new for applications of HiBi-FLMs, has been proposed and demonstrated.

We propose a novel polarization-maintaining index-guiding photonic crystal fiber (PCF). It is composed of a solid silica core and a cladding with squeezed-hexagonal-lattice elliptical air holes. Using a full-vector finite-element method, we study the modal birefringence of the fundamental modes in such PCFs. Numerical result shows that very high modal birefringence with a magnitude of the order of ${10}^{-2}$ around $1550\mathrm{nm}$ has been obtained. Furthermore, large normal dispersion appears over a wide range of wavelengths in both orthogonal polarizations.

Mode‐division multiplexing (MDM) is a promising technology for increasing the data‐carrying capacity of a single few‐mode optical fiber. The flexible mode manipulation would be highly desired in a robust MDM network. Recently, orbital angular momentum (OAM) modes have received wide attention as a new spatial mode basis. In this paper, we firstly proposed a long period fiber grating (LPFG) system to realize mode conversions between the higher order LP core modes in four‐mode fiber. Based on the proposed system, we, for the first time, demonstrate the controllable all‐fiber generation and conversion of the higher order LP core modes to the first and second order circularly polarized OAM beams with all the combinations of spin and OAM. Therefore, the proposed LPFG system can be potentially used as a controllable higher order OAM beam switch and a physical layer of the translating protocol from the conventional LP modes communication to the OAM modes communication in the future mode carrier telecommunication system and light calculation protocols.

As one of the most striking localized structures in dissipative systems, pulsating soliton has been widely studied in theory but rarely observed in experiments. Here, three typical types of soliton pulsations are experimentally demonstrated in an L-band normal-dispersion mode-locked fiber laser via the dispersive Fourier transform (DFT) technique. According to the distinctive features, they are classified as single-periodic pulsating soliton, double-periodic pulsating soliton and soliton explosion. These pulsations have common features such as energy oscillation, bandwidth breathing and temporal shift. However, the pulse is repeated every two oscillations for double-periodic pulsating soliton. When it comes to soliton explosion, because of the intermittent overdriven nonlinear effect induced by the extreme energy oscillation, the spectrum cracks into pieces at a periodic manner. To the best of our knowledge, it is the first time that both pure soliton pulsations and soliton explosion are observed experimentally in the same fiber laser. The results will enhance a more comprehensive understanding for the soliton pulsating phenomena.

We demonstrate an electrically tunable Sagnac filter based on a photonic bandgap fiber that is realized by infusing liquid crystal into a solid-core air-hole photonic crystal fiber. The filter enables an electrical tuning with a range of about $26\mathrm{nm}$ for one single interference minimum in the transmission bandgap from $1330\text{to}1650\mathrm{nm}$ wavelength. The tuning efficiency is averaged to $0.53\mathrm{nm}∕\mathrm{V}$.

A broadband wavelength tunable mode-locked Tm³⁺-doped fiber laser operating in the 2 μm region based on a graphene saturable absorber is experimentally investigated. A section of graphene film is transferred on a microfiber, which allows light-graphene interaction via evanescent field. The microfiber based graphene not only acts as an excellent saturable absorber for mode-locking, but also induces a polarizing effect to form an artificial birefringent filter for wavelength selection. By tuning the polarization states in the laser cavity, the laser exhibits tunable wavelength mode-locked pulses over a wide range from 1880 to 1940 nm. Such a system provides a compact, user friendly and low cost wavelength tunable ultrashort pulse source in the 2 μm region.