Magneto-rheological (MR) fluid technology has significantly developed during the past decades. The application of MR fluids has proliferated in various engineering fields with the development of MR fluid-based devices, especially MR fluid dampers. MR dampers are semi-active devices used for vibration reduction in many engineering applications. The MR dampers could offer an outstanding capability in semi-active vibration control due to excellent dynamical features such as fast response, low power consumption, and simple interfaces between electronic input and mechanical output. Modelling of MR damper is crucial in describing MR damper’s behaviour. It is critical to comprehend the dynamic behaviour of these devices, as nonlinear hysteresis is a rather complex phenomenon. The Modified Bouc-Wen model represents the MR damper mathematically since this model is capable of performing as precisely as the non-parametric model. The Modified Bouc-Wen model parameters are damper dependent and must be defined for further simulation studies before utilising the damper. Validation of MR damper experimentally is one of the tasks required to confirm the parametric model performance. The specified parameters are believed to be worthwhile for this MR damper’s use in further studies of real-time semi-active (SA) suspension systems. The small values of percentage difference for force (0.5-3.5%) indicate that the parameters implemented in the Modified Bouc-Wen model accurately portray the characteristics and behaviour of the MR damper.
Water quality in breeding tank plays a significant role when breeding the fish because optimal water quality is significant as these environmental changes will affect young fish to grow successfully. In order to ensure an optimal water quality in the fish breeding tank, an automatic and IOT based monitoring system is essential to replace the conventional monitoring which is done manually. In this paper, Jade Smart 1.0 was developed as a IoT based monitoring system of water quality in the breeding tank which consists of three identical boxes equipped with ESP32 as microcontroller, pH sensor, water temperature sensor and water turbidity sensor. This smart monitoring system is capable to digitally collect, store and display the water quality data in real-time through web and mobile phone applications. Jade Smart 1.0 was tested with three different points known as point A, point B and point C, in real local fish breeding tank in Seremban 2, Negeri Sembilan. Point A was located at the incoming water source, point B, at the corner of the tank opposite of the incoming water and point C, at the corner opposite of point B. The result showed that the average pH level at three locations for water depth of 10cm was pH 6.48 and at water depth of 20cm, dropped to pH 6.40. The maximum difference was 2.6% while the minimum difference was 0.6%. For water temperature at three locations at the water depth of 10cm, the average reading was 28.6°C while for water depth of 20cm, the average reading dropped to 28.3°C. The maximum difference of 1.7% and minimum difference of 0.3% were found. Next, for water turbidity, the location A measured an average of 3.3NTU while location B and location C measured an average reading of 9.8NTU and 9.9NTU respectively.
Common symptoms detected by children with autism spectrum disorder (ASD) include having problems with their fine and gross motor skills. One of the parameters usually associated with the development of ASD children's motor skill performance is Handgrip Strength (HGS). In healthcare, data gathering for the purpose of rehabilitation and therapy are usually conducted manually by the trainer or therapist for multiple candidates in a continuous intervention plan over days, weeks, or even months. This traditional and restrictive approach might not result in prompt, effective, and accessible health services or care that is centred on the needs of the patient. This creates a gap in the adoption of digital transformation-based solutions, particularly in giving the benefit of having a therapist, trainer, or guardian who can track the progress of treatment interventions online via a web application. Hence, this study aims to develop a bicycle handlebar with monitoring systems technology such as an IoT module, hand grip sensor, and heart rate to be used as an intervention tool for ASD children during the physical therapy session. The bicycle handlebar is customized and designed in SolidWorks software. It is 3D Printed to integrate the usage of sensors such as load cells and heart rate sensors to track the motor skill condition of ASD children. The handlebar is designed at a diameter of approximately 30 mm to enable an optimum reading of children's handgrip strength. The data logging system uses the TTGO T-Display with ESP32 microcontroller to allow a wireless and seamless data reading and transfer. Data from the sensors are sent via Wi-Fi to a custom website, Smart Fi-cycle IoT Website, allowing users to access through devices such as mobile phones and PC/Laptop. This system will enable patients and interventionists to track their motor skill performance through a systematic monitoring system.