In order to provide a constant and complete operational picture of the maritime situation in the Exclusive Economic Zone (EEZ) at over the horizon (OTH) distances, a network of high frequency surface-wave-radars (HFSWR) slowly becomes a necessity. Since each HFSWR in the network tracks all the targets it detects independently of other radars in the network, there will be situations where multiple tracks are formed for a single vessel. The algorithm proposed in this paper utilizes radar tracks obtained from individual HFSWRs which are already processed by the multi-target tracking algorithm at the single radar level, and fuses them into a unique data stream. In this way, the data obtained from multiple HFSWRs originating from the very same target are weighted and combined into a single track. Moreover, the weighting approach significantly reduces inaccuracy. The algorithm is designed, implemented, and tested in a real working environment. The testing environment is located in the Gulf of Guinea and includes a network of two HFSWRs. In order to validate the algorithm outputs, the position of the vessels was calculated by the algorithm and compared with the positions obtained from several coastal sites, with LAIS receivers and SAIS data provided by a SAIS provider.

To obtain the complete operational picture of the maritime situation in the Exclusive Economic Zone (EEZ) which lies over the horizon (OTH) requires the integration of data obtained from various sensors. These sensors include: high frequency surface-wave-radar (HFSWR), satellite automatic identification system (SAIS) and land automatic identification system (LAIS). The algorithm proposed in this paper utilizes radar tracks obtained from the network of HFSWRs, which are already processed by a multi-target tracking algorithm and associates SAIS and LAIS data to the corresponding radar tracks, thus forming an integrated data pair. During the integration process, all HFSWR targets in the vicinity of AIS data are evaluated and the one which has the highest matching factor is used for data association. On the other hand, if there is multiple AIS data in the vicinity of a single HFSWR track, the algorithm still makes only one data pair which consists of AIS and HFSWR data with the highest mutual matching factor. During the design and testing, special attention is given to the latency of AIS data, which could be very high in the EEZs of developing countries. The algorithm is designed, implemented and tested in a real working environment. The testing environment is located in the Gulf of Guinea and includes a network of HFSWRs consisting of two HFSWRs, several coastal sites with LAIS receivers and SAIS data provided by provider of SAIS data.

The aim of this paper is to propose, develop and test multi-radar multi-target tracking algorithm for maritime surveillance at over-the-horizon (OTH) distances. The proposed algorithm utilizes a weighted pure minimum mean square error (MMSE) algorithm for multi-radar data fusion and adaptive alpha - beta tracking algorithm for target tracking. The developed data fusion algorithm calculates the weighted center of mass of all targets observed by OTH radars (OTHRs) within a gate radius of predicted position, and uses it for a track update process. During the process a weighting factor which will be used in an adaptive alpha-beta tracking algorithm is derived. The weighting factor as well as alpha and beta factors are updated in each observation period and depend on all targets, which have fallen into a gate radius during the track update process. The algorithm is designed, implemented, and tested in an environment consisting of a simulated network of two OTHRs with significantly overlapping surveillance areas.

This paper explores the challenges and constraints when over the horizon (OTH) maritime surveillance service utilizes an Internet of Things (IoT) as its backbone. The service is based on High Frequency Surface Wave Radars (HFSWRs) and relies on a satellite communication network as its communication infrastructure in harsh environments. The complete IoT OTH maritime surveillance network is currently deployed in the Gulf of Guinea, which due to its tropical climate represents an unfavorable environment for sensors and communications. In this paper, we have examined the service performance under various meteorological conditions specific to the Gulf of Guinea. To the best of our knowledge, this is the first analysis of IoT OTH maritime surveillance service in equatorial environment. Our analysis aims to mathematically describe the impact of harsh weather conditions on the performance of the service in order to mitigate it with careful overall system design and provide constant quality of the service. Analyses presented in the paper show that average service latency is about 90 s, but it can rise to about 120 s, which is used as a key information during the sensor data fusion algorithm design. Validity of the analyses is demonstrated through high quality of service with an outage probability of just 0.1% in the driest months up to the 0.7% in the rainiest months. The work presented here can be used as a guideline for deployment of maritime surveillance service solutions in other equatorial regions. Moreover, the gained experience presented in this paper will significantly facilitate future expansions of the existing maritime surveillance network with more HFSWRs. This will be done in such a way that it will not affect the quality of service of the entire system on a large scale.

With maximum range of about 200 nautical miles (approx. 370 km) High Frequency Surface Wave Radars (HFSWR) provide unique capability for vessel detection far beyond the horizon without utilization of any moving platforms. Such uniqueness requires design principles unlike those usually used in microwave radar. In this paper the key concepts of HFSWR based on Frequency Modulated Continuous (FMCW) principles are presented. The paper further describes operating principles with focus on signal processing techniques used to extract desired data. The signal processing describes range and Doppler processing but focus is given to the Digital Beamforming (DBF) and Constant False Alarm Rate (CFAR) models. In order to better present the design process, data obtained from the HFSWR sites operating in the Gulf of Guinea are used.

The steady increase of the world population and economy leads to an increase in both types and amounts of goods transported over seas, which further inevitably leads to an increase of criminal activities in the maritime arena. In order to stifle criminal activities nations are forced to develop sophisticated sensor networks. The backbone of any sensor network is a communication network which connects all sensors with the command centers, most often located hundreds of kilometers away from the sensors. In developing countries, communication networks are very often poorly developed, leaving only satellite links as somewhat reliable means of communication. Henceforth, in this paper, a laboratory for the Internet of Things (IoT) communication infrastructure environment designed to facilitate maritime sensor network design process in areas where communication network is dependent on data transfer over satellite links is presented. In order to successfully describe and develop a laboratory for IoT communication infrastructure environment, necessary data are collected during the design and deployment of a maritime surveillance network in the Gulf of Guinea. The main advantage of the proposed laboratory environment is the inclusion of satellite link simulation in the IoT laboratory environment. This feature provides an opportunity to cover a much broader scope of IoT solutions compared to other IoT laboratories.