Nanomaterials are attractive materials for researchers because they have essential characteristics in terms of their properties. Carbon has an ample range of crystalline allotropes. Some, such as graphite and diamond, have been known since ancient times, while new forms of carbon with potential for various applications have been discovered in recent decades. Since the discovery of graphene 20 years ago, research has increased on composite materials that take advantage of carbon structures for their electrical, thermal, and mechanical properties and their ability to be synthesized at the nanometer scale. Graphene has stood out above other nanomaterials due to its surprising properties and high impact on technological research, so its uses have diversified in different areas of science such as medicine, electronics, engineering, etc. This work aims to show some new and innovative applications of graphene, on which we can see its versatility as engineering material. It also seeks to show its potential in research and development processes for its use. These are key components of advanced graphene-based materials systems under active development, with an eye on the future of advanced materials science and technology.

Polyethylene terephthalate (PET) is a polyester used in the beverage bottling industry that generates a serious pollution problem. Films were obtained to reuse discarded PET bottles, and their surface was modified to determine their effectiveness in supporting the immobilization of the laccase enzyme applied to a catechol biodegradation assay. Radiofrequency (RF) plasma was used to modify the PET surface using different precursors: (a) with the use of air as precursor, the effect of the etching caused by the air on the greater or lesser immobilization was observed; (b) with the use of ethylenediamine, a mixture of N₂/H_2, or aniline as precursors, it was observed which of these three precursors presented the greater or lesser number of amino groups deposited on the PET surface. After plasma modification, the films were cross-linked with glutaraldehyde to immobilize the laccase enzyme. Finally, the catechol test was performed. It was found that the best etching time using air as a precursor was 90 min, and the precursor that caused a higher insertion of amino groups on the surface was ethylenediamine, which reached a density of amino groups of 3.98 ± 0.10 g·mm⁻². The highest percentage of laccase immobilization achieved on the surface of ethylenediamine-modified PET was 97.30%. In the catechol assay, the highest retention was 86.11%. This research reveals how the effect of plasma increases the surface area on a PET surface and, in conjunction with ethylenediamine as the best precursor of the three precursors evaluated, can immobilize a greater amount of enzyme and oxidize more catechol. There is no scientific evidence from previous studies that used air plasma technology to erode and then used three different precursors to modify a surface to immobilize the laccase enzyme and remove a water contaminant.