Between 1986 and 1995, 429 hydrofracturing tests have been carried out in six now-abandoned coal mines and two coal bed methane boreholes at depths between 600 and 1950 m within the greater Ruhr region in western Germany. From these tests, stress magnitudes and orientations of the stress tensor are derived. The majority of hydrofracturing tests were carried out from mine galleries away from mine workings in a relatively undisturbed rock mass. These data along with detailed information have been disclosed recently. In combination with already published material, we provide the first comprehensive stress database of the greater Ruhr region. Our study summarises the results of the extensive in situ stress test campaign and assigns quality to each data record using the established quality ranking schemes of the World Stress Map project. The stress magnitudes suggest predominantly strike-slip stress regime, where the magnitude of the minimum horizontal stress, S_hmin, is half of the magnitude of the maximum horizontal stress, S_Hmax, implying that the horizontal differential stress is high. We observe no particular change in the stress gradient at depth throughout the Carboniferous layers and no significant difference between tests carried out in coal mines and deep boreholes. The mean S_Hmax orientation varies between 133 ± 13^∘ in the westernmost located Friedrich Heinrich coal mine and 168 ± 23^∘ in the easternmost located Westphalia coal mine. The mean S_Hmax orientation, based on 87 data records from this and already published studies, of 161 ± 43^∘ is in good agreement with the regional stress orientation observed in northwestern Europe. The presented public database provides in situ stress magnitude and stress orientation data records that are essential for the calibration of geomechanical numerical models on regional and/or reservoir scales for, among others, assessing stability issues of borehole trajectories, caverns, and georeservoirs in general. For an application example of this database, we estimate slip and dilation tendencies of major geological discontinuities, discovered during the 700-year-long coal mining activities in the region. The result, although burdened by high uncertainties, shows that the discontinuities striking in the N–S and NW–SE directions have a higher slip tendency compared to the ones striking ENE–WSW and NNW–SSE, whereas a high dilation tendency is observed for discontinuities striking NNW–SSE and a low dilation tendency for the ones striking ENE–WSW. The stress orientation database is available under https://doi.org/10.24406/fordatis/200 (Kruszewski et al., 2022 a), the stress magnitude database is available under https://doi.org/10.24406/fordatis/201 (Kruszewski et al., 2022 b), whereas the hydrofracturing test reports are available under https://doi.org/10.24406/fordatis/222 (Kruszewski et al., 2022 c).

In this study, we carried out reactivation potential analysis of discontinuities revealed from four exploration boreholes penetrating heavily faulted and folded Upper Carboniferous rock strata of the Ruhr region. We performed this study based on the notion that slip is controlled by the ratio of shear to effective normal stresses acting on a pre-existing plane of weakness in the prevailing stress field configuration. The results of this analysis were supported by indicators of localized fluid flow, both on micro- and macro-scales, which confirm relationship between secondary permeability and in situ stress state in the Ruhr region. Findings from this study, in conjunction with results of destructive laboratory testing, indicate that the steep NW–SE- and NNE–SSW-striking planar discontinuities are likely to be either close to the critical state or critically stressed in the in situ stress configuration in the Ruhr region. These planar structures, as evidenced by indicators of localized permeability, are the main fluid pathways in the studied region. The NE–SW-striking discontinuities, on the other hand, are most likely to be closed and hydraulically inactive in the prevailing stress state. Based on results gained from this study, implications for utilization of deep geothermal energy in the region were discussed.

In this study, we investigate the potential for fluid-injection-induced fault reactivation and induced seismicity risk during simultaneous injection-extraction operation in a theoretical geothermal doublet system in a carbonate reservoir in the Ruhr region. Using a coupled three-dimensional thermo-hydro-mechanical approach, we investigate the probability of injection-induced fault rupture. We perform a sensitivity study assuming variability of the fault and matrix permeability, injection/production flow rates, well placement options, rock thermal properties, and evaluate the influence of thermally induced stresses. The ruptured fault areas were calculated based on a Coulomb friction law and a notion that the shear slip is controlled by the ratio of shear to effective normal stresses acting on a pre-existing plane of weakness in the in situ stress field configuration. Ruptured fault areas in the intrinsically not critically-stressed environment, using location-specific empirical correlations, were used to compute local moment magnitudes of potential earthquakes. Based on this study, we conclude that, in the long-term, thermally-induced stresses play a dominant role during fault reactivation and greatly increase the likelihood for induced seismicity. We, therefore, propose that a minimum safe distance between an injection well and a fault should be based primarily on the radius of a thermal plume generated during the expected lifetime of a geothermal system. Results from this study provide valuable insights for the development of future deep geothermal systems in the Ruhr region and other geothermal reservoirs worldwide.