Finite element (FE) human body models, though providing effective means for vehicle design and assessment from the safety point of view, are still under development stage due to their limited validation. These models have been validated for cadaveric test data available in the literature for different parts. However, it has been identified that the reconstruction of the real-world accident using these FE models is required in order to evaluate their biofidelity and robustness for real crash scenarios. Hence, in the present study FE reconstruction of three real-world pedestrian accidents from RAIDS, UK database using the THUMS pedestrian model has been carried out to study the behaviour of the model during the real-world crash scenario and evaluate its biofidelity. Methodology of reconstruction has been divided into two steps: estimation of unknown kinematic parameters related to crash conditions by kinematic reconstruction using multibody simulation, and FE estimation of injuries using the THUMS pedestrian model. Because, lower extremities are most commonly injured body part in pedestrian accidents, the present work focuses on lower extremity injuries. From the reconstruction study, it has been observed that kinematic and injury response of the THUMS lower extremities model shows good conformance with the actual crash data, in terms of both kinematic and injury response.
18 August 2022 in Computer Methods in Biomechanics and Biomedical Engineering
This study compared two morphing techniques (and their serial combination) to create subject-specific finite element models of 15 astronaut vertebrae. Surface deviations of the morphed models were compared against subject geometries extracted from medical images. The optimal morphing process yielded models with minimal difference in root-mean-square (RMS) deviation (C3, 0.52 ± 0.14 mm; T3, 0.34 ± 0.04 mm; L1, 0.59 ± 0.16 mm) of the subject’s vertebral geometry. <1% of model elements failed quality checks and compression simulations ran to completion. This research lays the foundation for the development of subject-specific finite element models to quantify musculoskeletal changes and injury risk from spaceflight.
2 January 2023 in Computer Methods in Biomechanics and Biomedical Engineering
Spinal injuries are a concern for automotive applications, requiring large parametric studies to understand spinal injury mechanisms under complex loading conditions. Finite element computational human body models (e.g. Global Human Body Models Consortium (GHBMC) models) can be used to identify spinal injury mechanisms. However, the existing GHBMC detailed models (with high computational time) or GHBMC simplified models (lacking vertebral fracture prediction capabilities) are not ideal for studying spinal injury mechanisms in large parametric studies. To overcome these limitations, a modular 50th percentile male simplified occupant model combining advantages of both the simplified and detailed models, M50-OS + DeformSpine, was developed by incorporating the deformable spine and 3D neck musculature from the detailed GHBMC model M50-O (v6.0) into the simplified GHBMC model M50-OS (v2.3). This new modular model was validated against post-mortem human subject test data in four rigid hub impactor tests and two frontal impact sled tests. The M50-OS + DeformSpine model showed good agreement with experimental test data with an average CORrelation and Analysis (CORA) score of 0.82 for the hub impact tests and 0.75 for the sled impact tests. CORA scores were statistically similar overall between the M50-OS + DeformSpine (0.79 ± 0.11), M50-OS (0.79 ± 0.11), and M50-O (0.82 ± 0.11) models (p > 0.05). This new model is computationally 6 times faster than the detailed M50-O model, with added spinal injury prediction capabilities over the simplified M50-OS model.
A comparative study was made for the weldability of 4-mm-thick 5083 aluminum-alloy sheets using friction-stir welding (FSW), metal inert gas (MIG) welding and braze welding. FSW joint characteristics were obtained using the high-speed steel tool having conical pin with rotation speed of 1000 rpm and transverse feed rate of 28 mm/min with the tool tilt angle held constant at 2°. MIG welding was carried out using Al5183 filler metal and UNIMIG-400 MIG welding machine with Ar as shielding gas. Braze welding was carried out using the acetylene flame with the AA4047 filler wire and Alu powder as a flux. Samples obtained in all the three cases were subjected to microstructural analysis, Vickers micro-hardness measurements and tensile-testing. Results indicated that of all the samples, FSW samples showed maximum tensile strength, approaching that of base metal. This could be attributed to wrought microstructure observed in the weld zone of FSW samples. Similarly, lower tensile strength of MIG and braze welded sample could be attributed to coarse grain microstructure and porosity observed in the respective samples. Variation of micro-hardness across the weld zone and base metal also gave insight into the relation between tensile strength properties and microstructural properties of these samples.