Cohesive Oxisols are a type of soil common in the Coastal Plateau in Brazil. These soils represent a challenge for agriculture and their study is fundamental to better land use. There have been a few studies on the porous system of cohesive soils on the micrometer scale. Our study aimed to provide a detailed analysis of the pore complexity of the cohesive horizon of a Brazilian Oxisol using 3D images (volumetric data reconstructed by 2D CT slices) and to correlate these parameters with soil physical–hydric attributes. For this purpose, images with two different resolutions were analyzed from multifractal, lacunarity, and entropy analyses. Additionally, a characterization of hydraulic properties was carried out based on a soil water retention curve (SWRC). No differences were observed between the resolutions for the different physical parameters analyzed. The lacunarity analysis showed a greater homogeneity of the pore system with pores grouped in clusters. The multifractal analysis showed fractal characteristics for the cohesive horizon, suggesting a more homogeneous pore distribution. The main results obtained from the SWRC showed a low available water content due to the predominance of ultramicropores. Overall, the results show a less complex pore system, indicating the presence of pores of small sizes, affecting the water retention and conduction through the soil.

In many soil processes, including solute and gas dynamics, the architecture of intra-aggregate pores is a crucial component. Soil management practices and wetting-drying (W-D) cycles, the latter having a significant impact on pore aggregation, are two key factors that shape pore structure. This study examines the effects of W-D cycles on the architecture of intra-aggregate pores under three different soil management systems: no-tillage (NT), minimum tillage (MT), and conventional tillage (CT). The soil samples were subjected to 0 and 12 W-D cycles, and the resulting pore structures were scanned using X-ray micro-computed tomography, generating reconstructed 3D volumetric data. The data analyses were conducted in terms of multifractal spectra, normalized Shannon entropy, lacunarity, porosity, anisotropy, connectivity, and tortuosity. The multifractal parameters of capacity, correlation, and information dimensions showed mean values of approximately 2.77, 2.75, and 2.75 when considering the different management practices and W-D cycles; 3D lacunarity decreased mainly for the smallest boxes between 0 and 12 W-D cycles for CT and NT, with the opposite behavior for MT. The normalized 3D Shannon entropy showed differences of less than 2% before and after the W-D cycles for MT and NT, with differences of 5% for CT. The imaged porosity showed reductions of approximately 50% after 12 W-D cycles for CT and NT. Generally, the largest pores (>0.1 mm³) contributed the most to porosity for all management practices before and after W-D cycles. Anisotropy increased by 9% and 2% for MT and CT after the cycles and decreased by 23% for NT. Pore connectivity showed a downward trend after 12 W-D cycles for CT and NT. Regarding the pore shape, the greatest contribution to porosity and number of pores was due to triaxial-shaped pores for both 0 and 12 W-D cycles for all management practices. The results demonstrate that, within the resolution limits of the microtomography analysis, pore architecture remained resilient to changes, despite some observable trends in specific parameters.