An earthquake sequence that culminated in aMw4.8 strike‐slip event near Timpson, east Texas, the largest reported earthquake to date in that region, had previously been attributed to wastewater injection starting 17 months before the onset of recorded seismic activity. To test if this earthquake sequence can be attributed to wastewater injection, we conducted coupled poroelastic finite element simulations to assess the spatial and temporal evolution of pore pressure and stress field in the vicinity of the injection wells and to calculate the Coulomb failure stress on the seismogenic fault as a function of the permeability of the injection layer, fault orientation, fault permeability, and orientation and magnitude of the in situ stress. We find that injection‐induced fault slip is plausible within the range of selected model input parameters, with slip favored by low reservoir permeability, low fault permeability, and a favorable orientation of the fault relative to the in situ stress state. Other combinations of equally plausible input parameters predict no slip within 96 months of simulated injection. Under most favorable boundary conditions for fault slip, fault slip occurs 7 months after the start of injection. Our results highlight the importance of detailed geomechanical site characterization for robust fault stability assessment prior to wastewater injection.
22 July 2019 in Journal of Geophysical Research: Solid Earth
To investigate mechanisms of seismic fault reactivation in crystalline basement in response to fluid injection in overlying sedimentary reservoirs, we conducted three‐dimensional finite element simulations to assess the effects of direct pore pressure communication and indirect poroelastic stress transfer on the change in Coulomb failure stress of favorably oriented faults of varying permeability structure in normal, strike‐slip, and reverse faulting stress regimes. We demonstrate that the direct pore pressure effect transmitted along a hydraulically conductive fault exceeds the indirect poroelastic effect, but alone is insufficient for fault reactivation in the basement. The poroelastic effect on the Coulomb failure stress results from induced normal tractions and, to a lesser extent, from induced shear tractions that relate to the flexing of the fault as the reservoir expands poroelastically with fluid injection. Assuming a higher Biot coefficient for reservoir over basement rock as previously reported, the combined direct pore pressure and indirect poroelastic effects result in reactivation of hydraulically conductive faults in the basement in normal and strike‐slip faulting stress regimes and in the reservoir in reverse faulting regimes. Sealing normal faults that are not preferentially conductive also preferentially reactivate in the reservoir. These findings apply to injection in either hanging or footwall of normal and reverse faults. Reducing the contrast in Biot coefficient between reservoir and basement favors fault reactivation in the reservoir for injection in the footwall in normal faulting stress regimes. These simulations demonstrate that geomechanical models without coupled poroelasticity underestimate the potential of fault reactivation in crystalline basement.
We use a fracture mechanics model to study subcritical propagation and coalescence of single and collinear oil‐filled cracks during conversion of kerogen to oil. The subcritical propagation distance, propagation duration, crack coalescence and excess oil pressure in the crack are determined using the fracture mechanics model together with the kinetics of kerogen‐oil transformation. The propagation duration for the single crack is governed by the transformation kinetics whereas the propagation duration for the multiple collinear cracks may vary by two orders of magnitude depending on initial crack spacing. A large amount of kerogen (>90%) remains unconverted when the collinear cracks coalesce and the new, larger cracks resulting from coalescence will continue to propagate with continued kerogen‐oil conversion. The excess oil pressure on the crack surfaces drops precipitously when the collinear cracks are about to coalesce, and crack propagation duration and oil pressure on the crack surfaces are strongly dependent on temperature.
Summary. To investigate primary petroleum migration through microfracturing of source rocks, we develop a theoretical multiphysics model incorporating simultan
31 May 2019 in Rock Mechanics and Rock Engineering
Summary. We conduct a parametric study on the subcritical propagation of an oil-filled, penny-shaped microcrack induced by the pressure increase caused by tran