An equivalent circuit method (ECM) is proposed for the design of multilayer frequency-selective surfaces (FSSs). In contrast to the existing ECMs that were developed mainly for the analysis of the properties of a given FSS, the presented ECM aims at providing the initial design parameters of an FSS from the desired frequency response. In this method, four types of basic FSS structures are used as the building blocks to construct the multilayer FSSs, and their surface impedances in both the normal- and the oblique-incidence situations are studied in detail in order to achieve more accurate equivalent circuit (EC) representation of the entire FSS. For a general FSS design with expected frequency response, the EC parameters and the geometrical sizes of the required basic building blocks can be synthesized from a few typical S-parameter (S11/S12) samplings of the response curves via a simple least-square curve-fitting process. The effectiveness and accuracy of the method are shown by the designs of a band-pass FSS with steep falling edge and a miniaturized band-pass FSS with out-of-band absorption. The prototype of one design is fabricated, and the measured frequency response agrees well with the numerical results of the ECM and the full-wave simulations.
At present, most near-eye display devices adopt flat substrates, which have problems such as limited field of view (FOV) and bulky shape, while the curved structure is expected to expand the FOV with appropriate volume. In this paper, we propose a curved holographic augmented reality (AR) near-eye display system based on holographic optical element (HOE) with the ability to expand the FOV. The system includes a display source and a HOE with curved substrate. We analyze the system by exploiting the diffraction theory between plane and curved surface, and a layered and weighted FOV optimization method using particle swarm optimization algorithm is proposed to realize the optimization of the phase of freeform HOE. Numerical and experimental results show that the proposed curved holographic near-eye display system can realize cylindrical AR display and expand the FOV of the system. It is expected to be applied to the holographic AR near-eye display in the future.
One main challenge faced in modern automotive safety design is the glare caused by strong external light. When glare directly hits the driver's eyes, the extreme brightness distribution in the driver's field of view reduces environmental visibility, causing a decrease in driver judgment and reaction speed, which increases the probability of accidents occurring. To reduce traffic accidents caused by glare in a changing environment, an intelligent holographic antiglare windshield system (IHAWS) based on a holographic optical element (HOE) is proposed. The antiglare HOE (aHOE) in IHAWS attenuates the external strong light directly in the driver's field of view to an acceptable level through diffraction and absorption of incident light, thereby alleviating abnormal brightness distribution caused by glare. The HOE in head‐up display (hHOE) projects driving information such as speed and navigation to the front of the vehicle, thus reducing safety hazards by minimizing driver distraction. The compatibility between these two types of HOEs requires an intelligent scheduling scheme based on binocular camera detection. The IHAWS proposed in this article attenuates the intensity of light directly shining on the driver's eyes, which inspires new solutions to reduce the incidence of accidents caused by glare.
31 July 2026 in Journal of Electromagnetic Engineering and Science
In this paper, a hybrid multilayer frequency selective surfaces (FSS) radome capable of maintaining a stable passband over a wide frequency range is proposed. The radome is composed of two FSS arrays embedded within the dielectric layers of a C-sandwich structure, enabling it to operate over a wide passband and maintain a stable frequency response with respect to different incident angles and polarizations. The design procedure employs curve fitting based on the equivalent circuit method (ECM), which is used to determine the initial structural dimensions of the FSS. For verification, a prototype was fabricated. The measured frequency response agreed well with the numerical results of the ECM and full-wave simulations, exhibiting flat-top characteristics at 4–12 GHz and remaining stable at an incident angle of 50° for TE and TM polarizations.