The anticorrosion properties of polymer emulsion modified cement-based coating with healing effect on carbon steel were investigated. The change of linear polarization resistance () and electrochemical impedance spectroscopy (EIS) have been used to measure the inhibitive and curative effect of electrodes painted with the coating in 3.5% NaCl solution. The results indicated the high alkalinity of filler (cement) in coating can obviously improve the anticorrosion performance of coated steel electrodes. And the inhibitive ability of cement-based coating with fluoride acrylic emulsion is superior to that of the coating with epoxy emulsion. Moreover, by adding antirust pigments and rust converters in the fluoride acrylic emulsion modified cement-based coating, the inhibitive property was improved and the curative effect can be observed.
Four kinds of alcohol amines were tested to improve the anticorrosion performance of the phosphoric and tannic acid (PTA)-based rust converter. The alcohol amine modified PTA rust converters with the optimum mechanical and functional performances were used to prepare the homogeneous single-component waterborne rust conversion-based paint. The mechanical properties and the long-term corrosion resistance of the synthesized rust converter-based paint were investigated. The results show that alcohol amine modified PTA rust converter can convert the rust layer into a thick passivation film with iron tannate and iron phosphate as the main components, significantly improving the corrosion resistance of the carbon steel. The alcohol amine D modified PTA rust converter (RC-D) showed the best anticorrosion and rust conversion performances. The waterborne rust conversion-based paint can convert the rust layer of steel into a blue-black and relatively flat passivation film layer. The waterborne polymer-based paint containing 10 wt.% RC-D significantly improves the long-term corrosion resistance of the rusty steel and the mechanical property of paint.
1 May 2016 in Journal of Materials in Civil Engineering
A mathematical model for the transport process of migrating corrosion inhibitor (MCI) in cement-based material and a two-dimensional numerical solution method using commercially-available software are proposed. The numerical analysis results are in a good agreement with experimental data obtained from the two-dimensional absorption tests for nonreactive MCI but do not coincide with the data for reactive MCI. The reason behind may be that the latter reacted with calcium hydroxide (CH) in cement mortar and hindered the transport process. Therefore a modified transport model involving the pore-blocking effect of reactive MCI in cement-based materials is established according to the chemometrics method. The numerical and test results prove that the amendatory model is reasonable to understand the mass transfer of reactive MCI in cement mortar. Variance analyses of the factors in the model are also performed to find the key factor affecting the MCI transport process. A basic transport model and numeric...
1 September 2017 in Journal of Materials in Civil Engineering
A novel aqueous penetrating corrosion inhibitor marked PCI-2016 was prepared by using multicompound and chelate-induced techniques for this paper. Adsorption and inhibition behaviors of PCI-2016 in a chloride solution had been investigated. Test results indicated that the PCI-2016 had an excellent inhibition ability and an identified curative effect on the corrosive steel in the chloride solution. Adsorption of PCI-2016 molecules on the steel surface followed the Temkin adsorption isotherm. The scanning electron microscope (SEM), the energy dispersive spectrometer (EDS), and the atomic force microscope (AFM) images showed many small global or columnar substances had accumulated on the steel surface and the elements of N and Zn in corrosion inhibitors were detected on the steel surface. The X-ray photoelectron spectroscopy (XPS) measurements supported the inhibitor particles that were absorbed on the steel surface by chemisorption and a dense film was formed to inhibit the steel corrosion. Mechanism studies indicated that a stable chelate formed between the iron and N-containing polycarboxylate ligands might be responsible for the high inhibiting efficiency of the inhibitor in the chloride solution.