Within the scope of the work, the possible use of fused deposition modeling (FDM) technology in executing rapid prototypes of cutting tools for aluminum sheets was systematically studied. Relevant investigations have thus far mainly concentrated on tools for the 3D printing of bent and deep-drawn pieces, yet the implementation of FDM tools in cutting has been insufficiently covered. This study aims to determine the characteristics of FDM cutting tools, such as wear and tear, dimensional stability, and cutting efficiency. Various tool designs were tested under different wall thicknesses and orientations with respect to the feed of Al99.5 sheets with thicknesses of 0.22 mm and 0.3 mm. According to the results, in the best case, three-dimensional printed PLA tools performed six cuts with no burrs and an acceptable wear level due to the IT tolerances (IT9 and IT10). Tools with thicker walls and more appropriate orientations were found to be more robust. However, some designs failed when subjected to greater loads, revealing a deficiency in some of the strength properties of the material. These observations suggest that it is possible to create 3D printed tools for modeling and small-scale production at considerably cheaper and faster rates than conventional methods. Future work will integrate advanced materials and designs to enhance tool performance, further solidifying FDM as a transformative approach in industrial tool manufacturing. With this research, the authors wanted to demonstrate that FDM technology can also be used to produce a classic sheet cut, which, of course, is still of great importance for prototyping or setting up production processes. This research demonstrated that FDM printing can play a role in this area.
The paper offers an in-depth deformation study of glass fiber-reinforced and carbon composite filaments of 3D printers. During the certification, the authors used DIC (Digital Image Correlation) as a full-field strain measurement technique to explore key material traits as a non-contact optical measurement method. The insights captured through the DIC technology enabled to better understand the localized strain distributions during the loading of these reinforced filaments. The paper analyzes the glass fiber and carbon fiber filaments used in 3D printing that are reinforced with these materials and are subjected to bending and compressive loading. The segment presents how loading affects the performance of reinforced filaments when varying such factors as the deposition patterns, layer orientation, and other process parameters. Different types and combinations of reinforcements and printing variables were tested, and the resulting dependencies of mechanical parameters and failure modes were established for each case. Key conclusions demonstrate that the mechanical behavior of both carbon- and glass fiber-reinforced filaments is strongly affected by the 3D printing parameters, particularly infill density, pattern, and build orientation. The application of Digital Image Correlation (DIC) allowed for a precise, full-field analysis of strain distribution and deformation behavior, offering new insights into the structural performance of fiber-reinforced 3D printed composites. The findings from the study provide guidance for the proper choice of filling material and the optimal parameters for the 3D printing process of models with high-performance indexes and seamless applications in the automotive and industrial manufacturing sectors.
This study addresses the emerging need for efficient and cost-effective solutions in low-volume production by exploring the mechanical performance and industrial feasibility of cutting tools that are fabricated using stereolithography apparatus (SLA) technology. SLA’s high-resolution capabilities make it suitable for creating precise cutting dies, which were tested on aluminum sheets (Al99.5, 0.3 mm, and AlMg3, 1.0 mm) under a 60-ton hydraulic press. Measurements using digital image correlation (DIC) revealed minimal wear and deformation, with tolerances consistently within IT 0.1 mm. The results demonstrated that SLA-printed tools perform comparably to conventional metal tools in cutting and bending operations, achieving similar surface quality and edge precision while significantly reducing the production time and cost. Despite some limitations in wear resistance, the findings highlight SLA technology’s potential for rapid prototyping and short-run manufacturing in the automotive and electronics sectors. This research fills a critical gap in understanding SLA-based tooling applications, offering insights into process optimization to enhance tool durability and broaden material compatibility. These advancements position SLA technology as a transformative tool-making technology for flexible manufacturing.
This study examines the influence of different printing orientations and infill settings on the strength and flexibility of components produced using resin-based 3D printing, particularly with masked stereolithography (MSLA). Using a common photopolymer resin and a widely available desktop MSLA printer, we produced and tested a series of samples with varying tilt angles and internal structures. To understand their mechanical behavior, we applied a custom bending test combined with high-precision deformation tracking through the GOM ARAMIS digital image correlation system. The results obtained clearly show that both the angle of printing and the density of the internal infill structure play a significant role in how much strain the printed parts can handle before breaking. Notably, a 75° orientation provided the best deformation performance, and infill rates between 60% and 90% offered a good balance between strength and material efficiency. These findings highlight how adjusting print settings can lead to stronger parts while also saving time and resources—an important consideration for practical applications in engineering, design, and manufacturing.
5 January 2026 in Spectrum of Engineering and Management Sciences
Digital Image Correlation (DIC) is a pivotal non-contact technique for full-field deformation analysis in automotive engineering. However, the high flexibility and porosity of synthetic leathers often compromise speckle pattern stability and measurement accuracy. This study presents a systematic evaluation of commercial spray paints to optimize speckle pattern generation for automotive PVC and felt-based leathers. The methodology integrates standardized adhesion testing (ISO 2409 cross-cut test), drying-time optimization, and microscopic characterization to ensure robust bonding. Performance was validated through Erichsen cupping tests, simulating multi-axial strain states typical of automotive interior components. Results demonstrate that solvent-based acrylic sprays provide superior adhesion (ISO Class 0) and maintain pattern integrity under large deformations (up to 30% strain), whereas water-based alternatives suffer from cracking and delamination. The optimized painting protocol significantly reduces correlation errors and "lost subsets" in DIC software. This research provides a reliable experimental foundation for material characterization and Finite Element Method (FEM) validation of interior systems. The findings offer a practical, cost-effective framework for enhancing optical strain measurement precision in the automotive manufacturing and testing sectors.
Digital Image Correlation systems are increasingly being used for non-contact measurement of deformation and strain in sheet metal components. However, the accuracy of such measurements can be significantly affected by various external and system-related factors. If these are not properly considered, substantial errors may be introduced. In this study, a short and longer flat sheet specimen were clamped in a vise to investigate how overhang and clamping stability influence the accuracy of the measured deformation fields. Two different measurement volumes were also evaluated to assess their effect on the results. These factors were evaluated through targeted experiments, and the resulting data were analyzed and interpreted. Based on the findings, recommendations were formulated to enhance the reliability of Digital Image Correlation measurements in both laboratory and industrial environments.