A novel fiber‐optic vector magnetic field sensor and its sensing quality dependent of fabrication method has been proposed and investigated. The proposed sensor has two surfaces on the tip of a multimode fiber, which is used as the sensing probe. By plating different thickness of gold film on the surfaces, surface plasmon resonance (SPR) can be generated and the signal can be reflected by the surfaces as well. Meanwhile, magnetic fluid (MF) as the magnetic field sensitive material is packed around the sensing probe. The experimental results prove that the response of MF to external magnetic field can be used to sense magnetic field intensity and direction via monitoring the dip wavelength of SPR. The obtained refractive index (RI) sensitivities are 2105 nm/RIU (RI range: 1.332–1.365) and 6692 nm/RIU (RI range: 1.372–1.411), magnetic field intensity sensitivities are 11.67 nm/mT (0°), and −0.47 nm/mT (90°). Besides, the proposed sensing probe is ultracompact and the footprint is extremely small (the length of sensing part is only 615 μm), which is very helpful for magnetic field detection in narrow space and gradient field.

A kind of magnetic field sensor using a microfiber coupler (MFC) surrounded with magnetic fluid (MF) is proposed and experimentally demonstrated. As the MFC is strongly sensitive to the surrounding refractive index (RI) and MF's RI is sensitive to magnetic field, the magnetic field sensing function of the proposed structure is realized. Interrogation of magnetic field strength is achieved by measuring the dip wavelength shift and transmission loss change of the transmission spectrum. The experimental results show that the sensitivity of the sensor is wavelength-dependent. The maximum sensitivity of 191.8 pm/Oe is achieved at wavelength of around 1537 nm in this work. In addition, a sensitivity of −0.037 dB/Oe is achieved by monitoring variation of the fringe visibility. These suggest the potential applications of the proposed structure in tunable all-in-fiber photonic devices such as magneto-optical modulator, filter, and sensing.

A novel, compact, and easy fabrication vector magnetic field sensor has been proposed and investigated. The proposed sensor consists of a U-bent single-mode fiber fixed in a magnetic-fluid-filled vessel. Neither mechanical modification nor additional fiber grating is needed during the sensor fabrication. The results show that the response of magnetic fluid to magnetic field can be used to measure the direction and intensity of magnetic field via whispering gallery modes supported by the U-bent fiber structure with suitable bending radius. The sensitivity of direction is 0.251 nm/°, and the maximum magnetic field intensity sensitivity is 0.517 nm/mT. Besides, the results of this work prove the feasibility for realizing vector magnetic sensors based on other bending structures (such as bending multimode interference, bending SPR structure) in the future.

A kind of reflective all-fiber magnetic field sensor based on a non-adiabatically tapered microfiber with magnetic fluid is proposed and experimentally demonstrated. The modal interference effect is caused by the abrupt tapers, which result in an approximately sinusoidal spectral response. The reflection spectra of the proposed sensor under different magnetic field strengths have been measured and theoretically analyzed. The maximum sensitivity of 174.4 pm/Oe is achieved at wavelength of around 1511 nm. Besides, an intensity tunability of −0.02 dB/Oe is also achieved. Comparing with the traditional sensors operating at transmission mode, the presented sensor in this work owns the advantages of smaller size and higher sensitivity and resolution due to the enhanced extinction ratio. The proposed structure is also promising for designing other tunable all-in-fiber photonic devices.