Gracieth Cavalcanti Batista

Ms. Gracieth Cavalcanti Batista

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2024 in Journal of Electronic Science and Technology
Verified
Journal Article
Open access
GBGracieth Cavalcanti Batista
Gracieth Cavalcanti Batista
JÖJohnny Öberg
Johnny Öberg
OSOsamu Saotome
Osamu Saotome
HVHaroldo Fraga de Campos Velho
Haroldo Fraga de Campos Velho
ESElcio Hideiti Shiguemori
Elcio Hideiti Shiguemori
ISIngemar Söderquist
Ingemar Söderquist

6 December 2024 in Sensors
Verified
Journal Article
Open access
PDF file
GBGracieth Cavalcanti Batista
Gracieth Cavalcanti Batista
CZCarl-Mikael Zetterling
Carl-Mikael Zetterling
JÖJohnny Öberg
Johnny Öberg
OSOsamu Saotome
Osamu Saotome
There is extensive use of nondestructive test (NDT) inspections on aircraft, and many techniques nowadays exist to inspect failures and cracks in their structures. Moreover, NDT inspections are part of a more general structural health monitoring (SHM) system, where cutting-edge technologies are needed as powerful resources to achieve high performance. The high-performance aspects of SHM systems are response time, power consumption, and usability, which are difficult to achieve because of the system’s complexity. Then, it is even more challenging to develop a real-time low-power SHM system. Today, the ideal process is for structural health information extraction to be completed on the flight; however, the defects and damage are quantitatively made offline and on the ground, and sometimes, the respective procedure test is applied later on the ground, after the flight. For this reason, the present paper introduces an FPGA-based intelligent SHM system that processes Lamb wave signals using piezoelectric sensors to detect, classify, and locate damage in composite structures. The system employs machine learning (ML), specifically support vector machines (SVM), to classify damage while addressing outlier challenges with the Mahalanobis distance during the classification phase. To process the complex Lamb wave signals, the system incorporates well-known signal processing (DSP) techniques, including power spectrum density (PSD), wavelet transform, and Principal Component Analysis (PCA), for noise reduction, feature extraction, and data compression. These techniques enable the system to handle material anisotropy and mitigate the effects of edge reflections and mode conversions. Damage is quantitatively evaluated with classification accuracies of 96.25% for internal defects and 97.5% for external defects, with localization achieved by associating receiver positions with damage occurrence. This robust system is validated through experiments and demonstrates its potential for real-time applications in aerospace composite structures, addressing challenges related to material complexity, outliers, and scalable hardware implementation for larger sensor networks.

24 July 2019 in Multimedia Tools and Applications
Verified
Journal Article
Closed access
PDF file
GBGracieth Cavalcanti Batista
Gracieth Cavalcanti Batista
WSWashington Luis Santos Silva
Washington Luis Santos Silva
DODuarte Lopes de Oliveira
Duarte Lopes de Oliveira
OSOsamu Saotome
Osamu Saotome

9 September 2025
Verified
Conference Paper
Open access
PDF file
GBGracieth Cavalcanti Batista
Gracieth Cavalcanti Batista
LTLeandro Bachega Trujilho
Leandro Bachega Trujilho
CZCarl-Mikael Zetterling
Carl-Mikael Zetterling
JOJohnny Oberg
Johnny Oberg
OSOsamu Saotome
Osamu Saotome
PHPer Hallander
Per Hallander
Structural Health Monitoring (SHM) is a transformative technology in aerospace engineering, enabling real-time assessment of aircraft structural integrity to enhance safety, reliability, and maintenance efficiency. Traditional inspection methods, such as visual inspections and non-destructive testing (NDT), require manual labor and aircraft downtime. In contrast, a SHM system offers continuous and automated monitoring, thereby reducing operational costs and improving aircraft availability. This paper presents an optimization study of a previously developed FPGA-based SHM system for carbon fiber-reinforced polymer (CFRP) laminates. The system uses piezoelectric transducers (PZTs) to both excite and receive Lamb waves and employs signal processing and machine learning techniques for damage detection. In the original implementation, signal processing steps such as discrete wavelet transform (DWT) and feature extraction were executed in MATLAB. In this work, a fixed-point hardware implementation of the DWT was developed and integrated into the acquisition pipeline. The DWT stage, originally implemented in MATLAB, was migrated to hardware, resulting in a processing time reduction from 1.43 seconds to 5.68 microseconds, which led to over 250,000 times speedup. The classification stage, based on a support vector machine (SVM) enhanced with Mahalanobis distance, was preserved in hardware. A comparative analysis shows that the embedded version achieves the same classification accuracy as the softwarebased approach, with no loss of precision. The results demonstrate that feature extraction can be executed in real-time, advancing the system toward fully embedded SHM applications.