Antonio Pepe

Dr. Antonio Pepe

National Council Research of Italy
orcid

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2006 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
APAntonio Pepe
Antonio Pepe
RLR. Lanari
R. Lanari
In this paper, an extension of the minimum cost flow (MCF) algorithm dealing with a sparse data grid, which allows the unwrapping of multitemporal differential synthetic aperture radar (SAR) interferograms for the generation of deformation time series, is presented. The proposed approach exploits both the spatial characteristics and the temporal relationships among multiple interferograms relevant to a properly chosen sequence. In particular, the presented solution involves two main steps: first of all, for each arc connecting neighboring pixels on the interferometric azimuth/range grid, the unwrapped phase gradients are estimated via the MCF technique applied in the temporal/perpendicular baseline plane. Following this step, these estimates are used as a starting point for the spatial-unwrapping operation implemented again via the MCF approach but carried out in the azimuth/range plane. The presented results, achieved on simulated and real European Remote Sensing satellite SAR data, confirm the effectiveness of the extended MCF unwrapping algorithm

5 December 2017 in Applied Sciences
Verified
Journal Article
Open access
PDF file
APAntonio Pepe
Antonio Pepe
Fabiana CaloFabiana Calo
Fabiana Calo
Synthetic Aperture RADAR Interferometry (InSAR) provides a unique tool for the quantitative measurement of the Earth’s surface deformations induced by a variety of natural (such as volcanic eruptions, landslides and earthquakes) and anthropogenic (e.g., ground-water extraction in highly-urbanized areas, deterioration of buildings and public facilities) processes. In this framework, use of InSAR technology makes it possible the long-term monitoring of surface deformations and the analysis of relevant geodynamic phenomena. This review paper provides readers with a general overview of the InSAR principles and the recent development of the advanced multi-track InSAR combination methodologies, which allow to discriminate the 3-D components of deformation processes and to follow their temporal evolution. The increasing availability of SAR data collected by complementary illumination angles and from different RADAR instruments, which operate in various bands of the microwave spectrum (X-, L- and C-band), makes the use of multi-track/multi-satellite InSAR techniques very promising for the characterization of deformation patterns. A few case studies will be presented, with a particular focus on the recently proposed multi-track InSAR method known as the Minimum Acceleration (MinA) combination approach. The presented results evidence the validity and the relevance of the investigated InSAR approaches for geospatial analyses.

16 April 2007 in Pure and Applied Geophysics
Verified
Journal Article
Closed access
PDF file
RLRiccardo Lanari
Riccardo Lanari
FCFrancesco Casu
Francesco Casu
MMMariarosaria Manzo
Mariarosaria Manzo
GZGiovanni Zeni
Giovanni Zeni
PBPaolo Berardino
Paolo Berardino
APAntonio Pepe
Antonio Pepe

23 October 2018 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Davide NottiDavide Notti
Davide Notti
Daniele GiordanDaniele Giordan
Daniele Giordan
Fabiana CaloFabiana Calo
Fabiana Calo
APAntonio Pepe
Antonio Pepe
FZFrancesco Zucca
Francesco Zucca
Jorge Pedro GalveJorge Pedro Galve
Jorge Pedro Galve
Satellite remote sensing is a powerful tool to map flooded areas. In recent years, the availability of free satellite data significantly increased in terms of type and frequency, allowing the production of flood maps at low cost around the world. In this work, we propose a semi-automatic method for flood mapping, based only on free satellite images and open-source software. The proposed methods are suitable to be applied by the community involved in flood hazard management, not necessarily experts in remote sensing processing. As case studies, we selected three flood events that recently occurred in Spain and Italy. Multispectral satellite data acquired by MODIS, Proba-V, Landsat, and Sentinel-2 and synthetic aperture radar (SAR) data collected by Sentinel-1 were used to detect flooded areas using different methodologies (e.g., Modified Normalized Difference Water Index, SAR backscattering variation, and supervised classification). Then, we improved and manually refined the automatic mapping using free ancillary data such as the digital elevation model-based water depth model and available ground truth data. We calculated flood detection performance (flood ratio) for the different datasets by comparing with flood maps made by official river authorities. The results show that it is necessary to consider different factors when selecting the best satellite data. Among these factors, the time of the satellite pass with respect to the flood peak is the most important. With co-flood multispectral images, more than 90% of the flooded area was detected in the 2015 Ebro flood (Spain) case study. With post-flood multispectral data, the flood ratio showed values under 50% a few weeks after the 2016 flood in Po and Tanaro plains (Italy), but it remained useful to map the inundated pattern. The SAR could detect flooding only at the co-flood stage, and the flood ratio showed values below 5% only a few days after the 2016 Po River inundation. Another result of the research was the creation of geomorphology-based inundation maps that matched up to 95% with official flood maps.

10 February 2011 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
FCFrancesco Casu
Francesco Casu
Andrea ManconiAndrea Manconi
Andrea Manconi
APAntonio Pepe
Antonio Pepe
RLRiccardo Lanari
Riccardo Lanari
We exploit the amplitude information of a sequence of synthetic aperture radar (SAR) images, acquired at different times, in order to generate displacement time-series in areas characterized by large and/or rapid deformation, the size of which is on the order of the image's pixel dimensions. We follow the same rationale of the Small BAseline Subset (SBAS) differential SAR interferometry (DInSAR) approach, by coupling the available SAR images into pairs characterized by a small separation between the acquisition orbits. We exploit the amplitudes of the selected image pairs in order to calculate the relative across-track (range) and along-track (azimuth) pixel-offsets (PO). Finally, we apply the SBAS inversion strategy to retrieve the range and azimuth displacement time-series. This approach, referred to as pixel-offset (PO-) SBAS technique, has been applied to a set of 25 ENVISAT SAR observations of the Sierra Negra caldera, Galápagos Islands, spanning the 2003-2007 time interval. The retrieved deformation time-series show the capability of the technique to detect and measure the large displacements affecting the inner part of the caldera that, in correspondence to the October 2005 eruption, reached several meters. Moreover, by comparing the PO-SBAS results to continuous GPS measurements, we estimate that the accuracy of the PO-SBAS time-series is on the order of 1/30th of a pixel for both range and azimuth directions.

15 July 2017 in Geophysical Research Letters
Verified
Journal Article
Open access
PDF file
Daniele CheloniDaniele Cheloni
Daniele Cheloni
VNVincenzo De Novellis
Vincenzo De Novellis
Matteo AlbanoMatteo Albano
Matteo Albano
AAA. Antonioli
A. Antonioli
Marco AnzideiMarco Anzidei
Marco Anzidei
CDCarlo Doglioni
Carlo Doglioni
We investigate a large geodetic data set of interferometric synthetic aperture radar (InSAR) and GPS measurements to determine the source parameters for the three main shocks of the 2016 Central Italy earthquake sequence on 24 August and 26 and 30 October (Mw 6.1, 5.9, and 6.5, respectively). Our preferred model is consistent with the activation of four main coseismic asperities belonging to the SW dipping normal fault system associated with the Mount Gorzano‐Mount Vettore‐Mount Bove alignment. Additional slip, equivalent to a Mw ~ 6.1–6.2 earthquake, on a secondary (1) NE dipping antithetic fault and/or (2) on a WNW dipping low‐angle fault in the hanging wall of the main system is required to better reproduce the complex deformation pattern associated with the greatest seismic event (the Mw 6.5 earthquake). The recognition of ancillary faults involved in the sequence suggests a complex interaction in the activated crustal volume between the main normal faults and the secondary structures and a partitioning of strain release.