Chemically enhanced solid–liquid separation (CES) of digestate can improve its membrane filterability but potentially influence the environmental features of the separated solid fraction, thus hindering its possible agricultural reuse. In this study, the effects were assessed of different dosages of polyaluminum chloride (PAC), epichlorohydrine-dimethylamine with ethylendiamine (DEED) and polyacrilamides (PAM) on CES of digestate from biowaste in terms of Total Suspended Solid (TSS) mitigation in the liquid fractions and resulting environmental quality of the solid fractions. Results from lab-scale trials showed that applied chemicals significantly increased the centrifugation efficiency with achieving minimum TSS concentration of 2347 ± 281 mgTSS/L (up to 90% improved TSS mitigation). Also, performed treatments led to almost complete removal of P and Heavy Metals (HMs) from the liquid fractions after centrifugation. Conditioned solid fractions showed higher Al (reaching 20 g kg−1 TS), organic carbon and nitrogen content (up to 324 mgTOC kg−1 TS and 44.1 mgTKN kg−1 TS, respectively) due to residual PAC, DEED and PAM. However, achieved concentrations of HMs guaranteed full consistency with EU regulation limits established for agricultural reuse of organic soil amendments. Further, leaching tests performed on the treated solid fractions indicate higher chlorides and soluble Al concentrations in the water extracts (up to 4.6 g L−1 and 2.3 g L−1, respectively), but lower HMs leachability from the digestates undergone CES. Nevertheless, water extracts from treated biosolids were characterized by higher phytotoxicity, likely related with direct Al toxicity and increased salinity due to chemicals addition. Accordingly, the effects on soil–plant system should be better investigated when agricultural reuse of CES-treated solid fraction of digestate is foreseen. Graphic abstract
Assessing the detailed characteristics of recycled plastics is essential for evaluating their quality and suitability for high-value applications compared to virgin polymers. This review provides a comprehensive overview of advanced analytical techniques used for characterizing the chemical, structural, morphological, and physical properties of recycled polymeric materials. The techniques examined include Fourier Transform Infrared Spectroscopy (FTIR), Micro-Raman spectroscopy, X-ray Fluorescence (XRF), Inductively Coupled Plasma (ICP) techniques, X-ray Powder Diffraction (XRPD), Differential Scanning Calorimetry (DSC), and Scanning Electron Microscopy (SEM). These methods are critically assessed for their effectiveness in detecting polymer degradation, surface and structural alterations, and the presence of contaminants—factors frequently introduced during mechanical recycling processes. For each technique, this review outlines the working principles, sample preparation protocols, and illustrative case studies while discussing their advantages, limitations, and operational challenges. By synthesizing current knowledge and methodological advancements, this review aims to support the development of robust and standardized quality assessment protocols. Enhancing the reliability and precision of recycled plastic characterization will improve their acceptance as high-quality secondary raw materials, thereby facilitating their upcycling and contributing to the broader goals of the circular economy.
This paper elucidates the theoretical principles behind the calculation of the size of a representative sample of granular solid waste. The key concept is the number of particles that must be present in a sub-portion of matter to be representative of a larger portion of matter. This depends on the fraction of particles in the waste batch showing the properties of interest, which shall be measured. A representative sample must include a fraction of particles of interest reliably similar to that of the waste batch to be characterized, with a controlled variability. In this context, it is demonstrated that the number of particles of interest that must be collected in a representative sample is 100. From this requirement, the mass of a representative sample can be calculated based on the knowledge of the frequency of particles of interest of the waste lot to be characterized. Data on particles concentrations in different samples of WEEE plastic scraps exemplifies how the presence in the sample of enough rare particles showing the property of interest is key to ensure reliable measurements. Further, the assumptions made on the controlled degree of variability to determine the minimum number of particles are discussed based on data on achievable intra- and inter-laboratory variability of analytical standards for waste characterization. Accordingly, the mass of laboratory samples and test portions recommended in published sampling plans or analytical standards are assessed for the occurring number of particles.
There is a growing interest in the use of pyrolysis plants for the conversion of solid waste into useful products (e.g., oil, gas, and char) and the analysis of air-polluting emissions associated with such a process is an emerging research field. This study applied a systematic mapping approach to collating, describing, and cataloging available evidence related to the type and level of air pollutants emitted from pyrolysis plants, the factors affecting emissions, and available mitigation strategies that can be adopted to reduce air pollution. The scientific literature indexed in Scopus and Google Scholar, as well as available industry reports, was interrogated to document the evidence. A database comprising 63 studies was synthesized and cataloged from which 25 air pollutants from pyrolysis plants were considered, including volatile organic compounds and persistent organic pollutants. Air pollutant levels varied depending on the scale of the pyrolysis plants, their operating conditions, and the feedstock used. Various technologies, such as wet scrubbers, electrostatic precipitators, and baghouse filters, are available and have been utilized to reduce emissions and comply with the existing EU regulations for waste incineration (2010/75/EU). The systematic mapping identified several knowledge gaps that need to be addressed to inform relevant environmental policymaking, technology development, and the adoption of best practices for the mitigation of emissions from pyrolysis plants.