With the continuous development of the geological engineering field, high-voltage electric pulse plasma rock-fracturing technology has become a research hotspot in recent years. It is now widely recognized that this fracturing technology has many application prospects and great economic benefits. Through the research process of this technology, it has proven to be an efficient and new type of rock-fracturing technology, which overcomes the problems of high cost, low efficiency, high safety risk, and serious pollution associated with traditional rock-fracturing technology. Also, it has unique advantages in terms of protecting the environment and reducing damage to the surrounding buildings. This paper reviews the research history of plasma shock wave influencing factors and pulsed discharge plasma rock-fracturing technology, summarizes the research on this technology from the perspectives of the mechanism of high-voltage electric pulse plasma rock fracturing and practical application, and discusses the feasibility of this technology when applied to the field of tunnel boring as well as the future development direction. This technology can be better used in the tunnel-boring field, which can greatly improve the tunnel-boring efficiency, but at present, the research on plasma rock-fracturing-assisted tunnel boring is still in the laboratory research stage, which lacks systematic research equipment and judging indexes, and the follow-up should focus on improving the systematic research capabilities of the plasma rock-fracturing-assisted tunnel-boring equipment, and systematically and comprehensively carry out research on rock-fracturing by plasma-assisted excavation equipment.
Plasma pulse shock wave rock-breaking technology represents a novel approach to rock fracturing. Present research on this subject largely addresses rocks and electrodes, yet often neglects the critical influence of shock waves in the rock-breaking process. Therefore, it is necessary to further study the propagation law of the shock wave and its reflection and transmission. This paper undertakes experimental simulations using the RHT rock model to explore the propagation process of plasma pulse shock waves based on two variables: the medium and the shape of the electrode. Integrated with one-dimensional stress wave theory, the study examines the impact of four specific parameters—dielectric thickness, surrounding rock height, surrounding rock density, and surrounding rock porosity—on the reflection and transmission rates of shock waves. Pressure data collected from experimental platform are utilized to validate the study’s conclusions. The findings indicate that the propagation behaviors of shock waves differ significantly between water and air mediums. The shape of the electrode causes significant differences in the pressure exerted by the shock wave at the same location. Both the thickness of the dielectric and the porosity of the surrounding rock show a positive correlation with the reflection coefficient and a negative correlation with the transmission coefficient, while the density of the surrounding rock exhibits an inverse relationship. The height of the surrounding rock is irrelevant to both reflection and transmission coefficients.
The electrical explosive fragmentation technique has attracted widespread attention due to its environmental friendliness and high efficiency. However, the mechanism by which dielectrics influence rock fragmentation remains unclear. This study innovatively selected seven types of environmentally friendly dielectrics to systematically investigate their roles in the metallic wire electrical explosive rock fragmentation process. By precisely characterizing the crack morphology of concrete blocks, shock wave–strain responses, and discharge signal characteristics, the diverse mechanisms by which different dielectrics modulate rock fragmentation were revealed. The results indicate that oxide dielectrics release energy continuously through thermochemical reactions, highly conductive solutions accelerate energy deposition, and reductant suspensions generate strong secondary shock waves—all significantly outperforming tap water in terms of rock fragmentation performance. Notably, the energy deposition efficiency shows a nonlinear relationship with fragmentation effectiveness, influenced by factors such as energy release modes, dielectric composition, and bubble dynamics. The energy conversion mechanism of the electrical explosive rock fragmentation process studied in this paper provides a theoretical foundation for the fine-tuning, customization, and greening of electrical explosive rock fragmentation strategies in engineering practice.
Plasma pulse technology based on the hydro-electric effect offers tremendous promise for effectively fracturing hard rock in subsurface engineering. However, the existence of complicated in situ stratigraphic circumstances in subterranean engineering and the limits of research on single stratigraphic factors both hamper the application of plasma pulse rock fracturing in complex geological contexts. Therefore, it is necessary to systematically investigate the influence of multiple in situ stratigraphic factors on rock fracturing by plasma pulse. In this study, numerical simulations were utilized to analyze the impact of three stratigraphic factors—lithology, ground stress, and joint—on rock fracturing by plasma pulse. The main conclusions are as follows: (1) Influence of lithology: Following plasma pulse fracturing at equivalent energy, the resulting damage volume, ranked from largest to smallest, is as follows: coal rock > marble > limestone > sandstone > granite. When only lithology is altered, fissure ratio and fractal dimension show a positive correlation; (2) Influence of ground stress: Ground stress inhibits plasma pulse rock fracturing. As the differential ground stress in various directions increases, the directionality of plasma pulse crack propagation becomes more prominent. With increasing ground stress, the damage volume decreases; (3) Influence of joint: Joints guide and concentrate fractures near the joint plane, promoting the formation of crushed zones. Fillers within joints increase the inhibition of vertical fractures and hinder pulse stress waves, resulting in decreased fissure ratio and fractal dimension compared to instances without fillers. The results of this study provide a viable numerical simulation method for plasma pulse rock fracturing and offer insights for constructing rock fracturing schemes in subsurface engineering.