This article reviews optical biosensors and their integration with microfluidic channels. The integrated biosensors have the advantages of higher accuracy and sensitivity because they can simultaneously monitor two or more parameters. They can further incorporate many functionalities such as electrical control and signal readout monolithically in a single semiconductor chip, making them ideal candidates for point-of-care testing. In this article, we discuss the applications by specifically looking into point-of-care testing (POCT) using integrated optical sensors. The requirement and future perspective of integrated optical biosensors for POC is addressed.
6 January 2014 in IEEE Transactions on Electron Devices
An enhancement-mode (E-mode) high-electron mobility transistor (HEMT) was demonstrated by inserting a p-type GaN layer underneath the gate electrode. The effects of process flows and device structures on the electrical properties are investigated in this paper. We demonstrated a threshold voltage (Vth) of 4.3 V by adjusting the built-in voltage of the diode formed between the p-GaN and channel by the alloy temperature. Next, we found the existence of parallel conduction paths of the p-GaN layer and 2-D electron gas (2DEG) channel in such a HEMT structure. By removing p-GaN above the gate-source and gate-drain regions, current conduction migrates from p-GaN to 2DEG channel. The process window of the p-GaN residual thickness to ensure a steady forward current-voltage operation was estimated to be 10±5 nm in our case. Finally, with the p-GaN underneath the gate contact to deplete surface leakage current, an E-mode HEMT with a breakdown voltage (VBD) of 1630 V is achieved.
For conventional GaN-based high electron mobility transistors (HEMTs), the work function of gate metal is critical to electrical parameters, such as OFF-state leakage current, forward operating current, and threshold voltage. A high work function is thus required to maintain Schottky gate contact. In this letter, an enhancement-mode HEMT composed of p-type GaN/AlGaN/GaN was fabricated. Unlike typical HEMTs that the Schottky barrier height is determined by the energy difference between gate metal work function and semiconductor (AlGaN, or GaN) conduction band, the insertion of the p-GaN relieves the constraint of gate metal. In addition, the gate Schottky barrier now correlates to the valence band of the semiconductor. Here we compare the HEMT performance of different gate metals-Ni/Au, Ti/Au, and Mo/Ti/Au. The results reveal that a tradeoff between V TH and output drain current.
Subthreshold swing (SS) is a key parameter in evaluating the power consumption and material properties of thin-film transistors (TFTs). In this letter, we report an amorphous indium gallium zinc oxide (a-IGZO) TFT with a high-κ SiO2/HfO2 gate insulator. The device shows a SS of 96 mV/decade and an on-to-off current ratio of 1.5 × 1010. The low SS was attributed to the fully depleted channel state, low interface defects, and efficient modulation of the device. With low defect states, the device demonstrates only 2.71% change of operating currents after 1.5 × 104 s stress.
A practical process to fabricate InGaN/GaN multiple quantum well light emitting diodes (LEDs) with a self-organized nanorod structure is demonstrated. The nanorod array is realized by using nature lithography of surface patterned silica spheres followed by dry etching. A layer of spin-on-glass (SOG), which intervening the rod spacing, serves the purpose of electric isolation to each of the parallel nanorod LED units. The electroluminescence peak wavelengths of the nanorod LEDs nearly remain as constant for an injection current level between 25mA and 100mA, which indicates that the quantum confined stark effect is suppressed in the nanorod devices. Furthermore, from the Raman light scattering analysis we identify a strain relaxation mechanism for lattice mismatch layers in the nanostructure.