The melting mechanism at medium heating rates is unclear, owing to the lack of accurate characterizations of structural changes in poly-directional melting conditions. Here, a particular multilayered nanostructure was selected to control the propagation of melting in a single direction. We predicted the heterogeneous to homogeneous melting (HeM to HoM) transition during a single melting process at medium heating rates of 10–400 K/ps by molecular dynamics (MD) simulations, without a change in heating rates. The information on structural changes for the HeM to HoM transition, including the loss of crystallinity and long- and short-range order, are clearly provided by both a single direction and the radial distribution functions. These results contribute to a more comprehensive understanding of the HeM to HoM transition induced by heating rates.
Contacted liquid fluids, in most cases, have the tendency to directly merge into a single larger fluid to minimize the surface energy. We present an abnormal drop formation process of contacted Cu liquid films with a radius of 101.7 Å or larger on carbon substrates by using molecular dynamics simulations. The formation process consists of consecutive pinch-off and full coalescence stages connected by detachment. The dominant motions of the bridge, away from the center and downward to the substrate, lead to the pinch-off of the initially connected droplets. The motions of the droplets, which are near each other at all times, leads to the repeated contact and full coalescence of the separated droplets. The abnormality is attributed to the competition between the motions of the droplets and the tiny liquid bridge that connects the droplets. The influence of the surface structures of substrates, especially carbon nanotubes, on the formation behavior is discussed by analyzing the mean square displacement, velocity fields, and density and scaling profiles. This study provides guidance for controlling drop formation behavior by regulating the surface structures of carbon substrates.
The fracture position of a friction plug welding (FPW) joint is typically located at or near the thermo-mechanically affected zone (TMAZ). Here, we found that microcracks in all FPW specimens initiate at the deformed plug center (DPC) zone and then propagate through the plug center along 45° shear surfaces, because the lowest hardness occurs at the DPC zone rather than the TMAZ or other zones, and the DPC zone presents a tilt fiber-like microstructure. Such a tilt microstructure stimulates formations and deformations of microvoids and propagation of microcracks along 45° shear surfaces. The ultimate tensile strength (237.7 MPa) and yield strength (220.8 MPa) of the FPW joint reach 78.8% and 85.7% of the base metal, respectively. These results indicate that 6061-T6 aluminum alloy can be effectively joined by the FPW technique.