Sodium-ion batteries (SIBs) are considered as promising alternatives to lithium-ion batteries because of the natural abundance and low cost of sodium resources. Unfortunately, SIBs usually suffer from the serious volume change of active materials and the sluggish kinetics of sodiation of the structure. To combat the above issues, herein we rationally design an integrated anode material of tin phosphides@carbon (Sn4P3@C) with a yolk–shell nanocube structure for SIBs. The voids and spaces between the Sn4P3 and carbon nanocubes can effective buffer the volume expansion of active materials during sodiation/desodiation processes, and the highly electrically conductive carbon material can promote the fast electron transfer, thus accelerating the kinetics of sodiation/desodiation. In SIBs, the Sn4P3@C yolk–shell nanocube electrode exhibits excellent sodium storage performance with a high discharge capacity of 701 mA h g−1 at 0.1 A g−1 after 50 cycles, remarkable rate capability (508 mA h g−1 even at 2.0 A g−1), and highly stable cycling performance (516 and 368 mA h g−1 after 500 cycles at 1.0 and 2.0 A g−1, respectively).
The exploration of advanced electrode materials with outstanding electrochemical properties is of considerable importance for hybrid supercapacitors but challenging. In this paper, an effective two-step solvothermal route is demonstrated to synthesize nitrogen-doped carbon dots (NCDs) decorated cobalt-doped nickel sulfide (Co-NiS) flower-like hierarchitectures. Because of the modification with NCDs and doping by cobalt atoms, the resulting Co-NiS/NCDs hierarchitectures exhibit an ultrahigh specific capacity up to 1240 C g−1 (2480 F g−1) at 1 A g−1 and a remarkable rate capability of 790.8 C g−1 (1581.6 F g−1) even at 20 A g−1 when used as advanced electrodes for supercapacitors. More significantly, coupling with ap-phenylenediamine (PPD) modified reduced graphene oxide (rGO) anode, a hybrid supercapacitor device is successfully constructed, which possesses an impressive energy density of 71.6 W h kg−1 at 712.0 W kg−1 and a decent cyclic stability with 78.3% retention after 12 000 cycles at 5 A g−1. The dual improvement strategy may provide insight to rational engineering of novel electrode materials with multi-components for high-performance hybrid supercapacitors.
1 February 2016 in Journal of Colloid and Interface Science
Lithium–sulfur (Li–S) batteries are promising energy storage systems owing to their high theoretical energy density and low costs due to the abundant reserves of sulfur. However, the easy dissolution of intermediate polysulfides (Li2Sx, 4 < x ≤ 8) and insulating nature of sulfur have hindered their commercialization. Herein, we develop a novel confinement approach by using porous hollow carbon nanospheres (HCNs) embedded with well-dispersed cobalt monoxide (CoO) nanocrystals (CoO/HCN), which can effectively combine the advantages of physical entrapment and chemical binding interactions of sulfur species. When used as a sulfur host material, the CoO/HCN–S composite cathode with 1.4 mg cm−2 sulfur exhibits excellent electrochemical performance with high discharge capacity (996 mA h g−1 after 200 cycles at 0.2C), great rate capability (620 mA h g−1 at 5.0C) and superior cycle stability (629 mA h g−1 after 1000 cycles at 1.0C with a capacity decay of only 0.033% per cycle and 482 mA h g−1 after 1000 cycles at 2.0C with a capacity decay of only 0.043% per cycle). Furthermore, a high and stable reversible capacity of 640 mA h g−1 after cycling for 250 cycles is achieved with a higher sulfur mass loading (3.6 mg cm−2).
Despite their advantages of high theoretical capacity and energy density, lithium–sulfur (Li–S) batteries still suffer from poor electrochemical performance resulting from the accelerated shuttle effect of polysulfides and the intrinsically low electroactivity of elemental sulfur. Herein, we report an ideal core–shell sulfur host material based on core–shell carbon encapsulated multi-chambered carbon nanospheres (MCCN@C) for Li–S batteries. The hierarchical and micro–mesoporous core in MCCN@C can allow a high sulfur loading (83.1 wt%) and serve as the physical barrier to block the polysulfide dissolution, and the carbon shell can provide additional physical confinements for improving the retention of soluble polysulfides. Moreover, the well-designed conductive networks of the MCCN@C material interconnected by carbon chambers can promote fast electron transfer and electrolyte penetration. In Li–S batteries, MCCN-S@C composite cathodes deliver significantly enhanced electrochemical performance with a high reversible capacity of 1163 mA h g−1 at 0.2C after 100 cycles, remarkable rate capability (626 mA h g−1 at 5.0C) and ultrahigh long-term cycle stability at high rates (651 mA h g−1 after 1000 cycles at 2.0C with 0.032% capacity decay per cycle). More importantly, the MCCN@C–S composite cathode with 3.6 mg cm−2 sulfur also delivers a high and stable electrochemical performance over 200 cycles.