Carbon dots (CDs) are zero-dimensional nanomaterials composed of carbon and surface groups attached to their surface. CDs have a size smaller than 10 nm and have potential applications in different fields such as metal ion detection, photodegradation of pollutants, and bio-imaging, in this review, the capabilities of CDs in metal ion detection will be described. Quantum confinement is generally viewed as the key factor contributing to the uniqueness of CDs characteristics due to their small size and the lack of attention on the surface functional groups and their roles is given, however, in this review paper, the focus will be on the functional group and the composition of CDs. The surface functional groups depend on two parameters: (i) the oxidation of precursors and (ii) their composition. The mechanism of metal ion detection is still being studied and is not fully understood. This review article emphasizes the current development and progress of CDs, focusing on metal ion detection based on a new perspective.

The process of palladium(II) chloride complex ion adsorption on activated carbon was investigated. The influence of variable parameters such as the initial concentration of the Pd(II) complex (from 0.04 to 2.25 mmol·kg^–1) and temperature (from 294 to 348 K) was determined. Experiments were conducted in the solution with pH equal to 0 and 1. It was found that the Freundlich adsorption isotherm describes the process better than the Langmuir model. The observed sorption capacity as high as q_294K = 42.4 mg·g^–1 and q_323K = 67 mg·g^–1 for activated carbon was found at 294 and 323 K, and it is increasing with temperature increase. The obtained results showed that the palladium(II) complex may react with functional groups present on the surface of activated carbon. The thermodynamic parameters such as the equilibrium constant and heat and entropy of adsorption were derived. The enthalpy value is equal to −6.7 kJ·mol^–1, and the entropy is equal to −23 J·mol^–1·K^–1. It is suggested that, during chemisorption of palladium(II) chloride complex ions, the palladium dichloro-oxide or PdCl₂ is formed on the surface of activated carbon.

Water pollution is caused by heavy metals, minerals, and dyes. It has become a global environmental problem. There are numerous methods for removing different types of pollutants from wastewater. Adsorption is viewed as the most promising and financially viable option. Nanostructured materials are used as effective materials for adsorption techniques to extract metal ions from wastewater. Many types of nanomaterials, such as zero-valent metals, metal oxides, carbon nanomaterials, and magnetic nanocomposites, are used as adsorbents. Magnetic nanocomposites as adsorbents have magnetic properties and abundant active functional groups, and unique nanomaterials endow them with better properties than nonmagnetic materials (classic adsorbents). Nonmagnetic materials (classic adsorbents) typically have limitations such as limited adsorption capacity, adsorbent recovery, poor selective adsorption, and secondary treatment. Magnetic nanocomposites are easy to recover, have strong selectivity and high adsorption capacity, are safe and economical, and have always been a hotspot for research. A large amount of data has been collected in this review, which is based on an extensive study of the synthesis, characterization, and adsorption capacity for the elimination of ions from wastewater and their separation from water. The effects of several experimental parameters on metal ion removal, including contact duration, temperature, adsorbent dose, pH, starting ion concentration, and ionic strength, have also been investigated. In addition, a variety of illustrations are used to describe the various adsorption kinetics and adsorption isotherm models, providing insight into the adsorption process.

In this work, we report the synthesis method of carbon quantum dots (CDs) using the one-step method for fast and effective metal ion determination. Ascorbic acid was used as an inexpensive and environmentally friendly precursor. High-pressure and high-temperature reactors were used for this purpose. Microscopic characterization revealed the size of CDs was in the range of 2–6 nm and they had an ordered structure. The photoluminescence properties of the CDs depend on the process temperature, and we obtained the highest PL spectra for 6 h of hydrothermal reaction. The maximum emission spectra depend poorly on synthesis time. Further characterization shows that CDs are a good contender for sensing Fe³⁺ in aqueous systems and can detect concentrations up to 0.49 ppm. The emission spectra efficiency was enhanced by up to 200% with synthesis time.

Platinum group metals (PGMs), including palladium, play a pivotal role in various industries due to their unique properties. Palladium is frequently employed in technologies aimed at environmental preservation, such as catalytic converters that reduce harmful emissions from vehicles, and in the production of clean energy, notably in the hydrogen evolution process. Regrettably, the production of this vital metal for our environment is predominantly centered in two countries—Russia and South Africa. This centralization has led to palladium being classified as a critical raw material, emphasizing the importance of establishing a secure and sustainable supply chain, as well as employing the most efficient methods for processing materials containing palladium. This review explores techniques for palladium production from primary sources and innovative recycling methods, providing insights into current technologies and emerging approaches. Furthermore, it investigates the economic aspects of palladium production, including price fluctuations influenced by emission regulations and electric vehicle sales, and establishes connections between palladium prices, imports from major producers, as well as copper and nickel prices, considering their often co-occurrence in ores.