The ocean is rich in resources. In order to facilitate the collection of marine resources, human beings have designed many robots to replace divers to overcome the harsh underwater conditions, most of which use motion rocker to control the movement of the rigid manipulator. It is difficult to accurately operate the underwater rigid manipulator with the moving rocker, and the rigid gripper and tools are also easy to damage and destroy the object being operated, which is not suitable for the work scene with high requirements for operation. Therefore, we design an underwater humanoid flexible manipulator motion control system (SMA controller) based on data glove, which can realize the precise control of complex actions, and reduce the destructive behaviors caused by improper operation.
11 June 2019 in IEEE Journal of Oceanic Engineering
The designs of the optimal shape of an autonomous underwater vehicle (AUV) and its aft propeller's optimal circulation can interact with each other. We propose an optimization approach that integrates the lifting line theory and the continuous adjoint method to address this conflict. The optimal circulation of a propeller is obtained via lifting line theory. The corresponding propeller force is introduced into the Reynolds-averaged flow equations as a source term and is considered in the development of a continuous adjoint formulation for the AUV shape optimization. Adjoint equations, with boundary conditions and sensitivity derivative expressions for the drag reduction problem, are derived in detail. The shapes of a small AUV and its aft propeller are simultaneously optimized using the proposed approach. Numerical results show that the proposed method decrease AUV drag by 17% at a rated speed. And a prototype test further confirms the effectiveness of the method.
With the deepening of ocean development, the tasks that underwater vehicles need to perform are more complex. Shared control provides a reliable scheme for robots to accomplish these tasks under teleoperation. At present, most of the underwater vehicles are equipped with traditional mechanical manipulator, which is challenging to realize the application of shared control. So, we developed a highly humanoid underwater robot for shared control. The robot is equipped with two humanoid arms. It can be remotely controlled by the operator through the full ocean depth optical fiber, and can also realize simple task planning based on its control system. We have realized and improved the auxiliary function in the operation room, such as motion capture, data fusion, etc. We built detailed modelling and simulation analysis of the robot, and used the sliding mode controller to achieve the stability control of the robot. Its reliability has been verified in the simulation and experiment. Finally, the robot completed the task autonomously in the offline state and showed a better control effect and stronger task completion ability under the shared control.
31 May 2025 in Journal of Mechanical Science and Technology