Absorption characteristics of a Helmholtz resonator positioned at the end wall of a circular duct are considered. The absorption coefficient of the resonator is experimentally investigated as a function of the diameter and length of the resonator neck and the depth of the resonator cavity. Based on experimental data, the linear analytic model of a Helmholtz resonator is verified, and the results of verification are used to determine the dissipative attached length of the resonator neck so as to provide the agreement between experimental and calculated data. Dependences of sound absorption by a Helmholtz resonator on its geometric parameters are obtained.
The attached length of orifices in reactive mufflers has been estimated based on numerical calculations by the finite-element method. The numerical results for a diaphragm in a duct are compared with
Effect of sound pressure level on acoustic impedance of an orifice in a baffle is investigated based on the measurements performed in an impedance tube by the two-microphone method. Dependences of...
Computer simulation results for the absorption capacity of a semi-infinite noise screen with the absorbing layer are presented. The screen efficiency was determined depending on the location of the sound source and the sound frequency. The influence of the size of the absorbing layer on the noise screen’s efficiency is analyzed. It is shown that there is an optimal size of the absorbing layer for which the absorption of the screen will be maximum. The article was prepared based on materials in a report at the Third All-Russian Acoustics Conference (September 21–25, 2020, St. Petersburg).
A new approach to optimization of reactive mufflers, which is based on use of muffler prototype with nondimensional geometrical parameters and integral criterion of acoustic performance of mufflers, is proposed. Implementation of the approach using the example of chamber mufflers is considered.