In this review, we summarize the latest advances in the design of optical frequency-domain reflectometers (OFDRs), digital signal processing, and sensors based on special optical fibers. We discuss state-of-the-art approaches to improving metrological characteristics, such as spatial resolution, SNR, dynamic range, and the accuracy of determining back reflection coefficients. We also analyze the latest achievements in the OFDR-based sensors: the accuracy of spatial localization of the impact, the error in detecting temperatures, deformation, and other quantities, and the features of separate measurement of various physical quantities. We also pay attention to the trend of mutual integration of frequency-domain optical reflectometry methods with time-domain optical reflectometry, which provides completely new sensing possibilities. We believe that this review may be useful to engineers and scientists focused on developing a lab setup, complete measurement instrument, or sensing system with specific requirements.

We describe a method for reducing the cost of optical frequency domain reflectometer (OFDR) hardware by replacing two reference channels, including an auxiliary interferometer and a gas cell, with a single channel. To extract useful information, digital signal processing methods were used: digital frequency filtering, as well as empirical mode decomposition. It is shown that the presented method helps to avoid the use of an unnecessary analog-to-digital converter and photodetector, while the OFDR trace is restored by the equal frequency resampling (EFR) algorithm without loss of high resolution and with good measurement repeatability.

Standard single-mode telecommunication optical fiber is still one of the most popular in distributed acoustic sensing. Understanding the acoustic, mechanical and optical features of various fibers available currently can lead to a better optimization of distributed acoustic sensors, cost reduction and adaptation for specific needs. In this paper, a study of the performances of seven fibers with different coatings and production methods in a distributed acoustic sensor setup is presented. The main results include the amplitude–frequency characteristic for each of the investigated fibers in the range of acoustic frequencies from 100 to 7000 Hz. A single-mode fiber fabricated using the modified chemical vapor deposition technique together with a polyimide coating has shown the best sensitivity to acoustic events in the investigated range of frequencies. All of this allows us to both compare the studied specialty fibers with the standard single-mode fiber and choose the most suitable fiber for a specific application, providing an enhancement for the performance of distributed acoustic sensors and better adaptation for the newly aroused potential applications.

Optical frequency domain reflectometry (OFDR) is a widely used method for measuring optical lengths to backscattering points in optical fibers and integrated optical chips. However, its application for measuring absolute distances in other media, including free space, remains insufficiently studied. This work aims to solve two main challenges in developing a free-space distance measurement method based on OFDR. The first one is the adaptation of the standard OFDR method to air-based measurements, considering the complex and/or atypical composition of the optical line, including the combination of fiber and air, as well as differing chromatic dispersion. The second task is the calibration of the reflectometer to ensure high measurement accuracy. The article proposes a mathematical framework for eliminating the influence of chromatic dispersion, based on signal transformation and the introduction of an equivalent phase of the reference interferometer. The method was verified experimentally. The experimental setup included an OFDR system, a collimator, and a corner reflector movable along a 2-m rail. An important result is the development and testing of a dispersion compensation method, which eliminated peak broadening in the trace as the distance increased, maintaining its width at a level of tens of microns. Through calibration using an interferometric fringe-counting method, a frequency-to-distance conversion coefficient was determined, ensuring measurement accuracy up to 2 μm. Thus, the study demonstrates the feasibility of adapting OFDR for precise distributed distance measurements in free space and in complex or otherwise non-standard structured environments, significantly expanding the application scope of the technology.

This work is devoted to the scientific and technical aspects of individual stages of active optical fibers preforms’ optical-geometric parameters metrological control. The concept of a system presented makes it possible to carry out a study of a rare earth element distribution in the preform of an active optical fiber and to monitor geometric parameters, and also to study the evolution of the refractive index profile along the length of the sample at a qualitative level. As far as it is known, it is the first description of the preform optical, geometric, and luminescent properties measurement within a single automated laboratory bench. Also, the novelty of the approach lies in the fact that the study of the refractive index profile variation along the length of the preform is, for the first time, conducted using the “dry” method, that is, without immersing the sample in synthetic oil, which makes the process less labor-intensive and safer.