A circularly polarized ellipsometer was developed to enable real-time measurements of the optical properties of materials. Using a four photo-detector quadrature configuration, a phase modulated ellipsometer was substantially miniaturized which has the ability to achieve a high precision detection limit. With a proven angular resolution of 0.0001 deg achieved by controlling the relative positions of a triangular prism, a paraboloidal and a spherical mirror pair, this new ellipsometer possesses a higher resolution than traditional complex mechanically controlled configurations. Moreover, the addition of an algorithm, FTA (fault tolerance algorithm) was adopted to compensate for the imperfections of the opto-mechanical system which can decrease system measurement reliability. This newly developed system requires only one millisecond or less to complete the measurement task without having to adopt any other modulation approach. The resolution achieved can be as high as 4x10−7 RIU (refractive index unit) which is highly competitive when compared with other commercially available instruments. Our experimental results agreed well with the simulation data which confirms that our quadrature-based circularly polarized ellipsometer with FTA is an effective tool for precise detection of the optical properties of thin films. It also has the potential to be used to monitor the refractive index change of molecules in liquids.
12 December 2011 in IEEE Transactions on Industrial Electronics
An electromechanically actuated electret-based loudspeaker made with an organic material membrane is presented, which is small in volume, extremely thin, and lightweight for light vehicle applications. As obtaining good sound quality in a vehicle is a complicated and difficult task, the electrostatic thin-film actuator can be cut into any shape and then assembled into an electret-based loudspeaker for placement at any location within the vehicle. The sound field in a vehicle can be optimized by properly tailoring the electret-based loudspeaker performance and choosing the most appropriate location for the loudspeaker for optimal sound performance. In addition, it is possible to design a novel 3-D sound field. Our newly fabricated 100-mm-by-100-mm electret loudspeaker weighs only 4 g and is 1 mm thick. It only consumes 0.15 mW to generate a sound pressure level at 88 dB at 1 kHz, which is very energy efficient for electric car applications. In summary, our newly flexible electret-based loudspeaker has tremendous potential for future automotive applications due to its excellent advantages over current vehicle loudspeakers.
12 November 2021 in Smart Materials and Structures
In this paper, we report a new method called a multi-integer frequency, two-mode (MIF-TM) to generate multi-directional traveling waves on a square plate. The uniqueness of this driving method is threefold. Firstly, as the two driving frequencies are at or near resonant frequencies of the two bending modes, the driving efficiency can be largely enhanced by using structural resonance. Secondly, as the two actuating areas can sufficiently induce traveling waves, each of them is driven by one of the two driving frequencies. It is possible to generate steady traveling waves by making the two driving frequencies possess a multi-integer relationship and with a phase difference. Thirdly, the direction of the traveling wave can be controlled to propagate toward either the x - or y -direction by designing the location and size of the actuating area. To assist in the design of the MIF-TM traveling wave generator, an analytical model was derived to depict the induction of the traveling waves. Using this analytical model, we designed a piezoelectric traveling wave generator with weight of 2.35 g, dimension of 45 × 45 × 0.4 mm piezoelectric bimorph with four designated electrode pairs. It was verified to be either in the positive or negative direction traveling wave as it was controlled by adjusting the phase difference between the two driving frequencies. Our experimental results demonstrated that the generated x -direction traveling wave can move a 0.3 g object at a speed of 1.48 mm s −1 , and the generated y -direction travel wave can move this same object at a speed of 1.36 mm s −1 . The design, numerical analysis, finite element analysis, and experimental studies are detailed in this paper.
The relentless scaling of semiconductor devices pushes the doping level far above the equilibrium solubility, yet the doped material must be sufficiently stable for subsequent device fabrication and operation. For example, in epitaxial silicon doped above the solubility of phosphorus, most phosphorus dopants are compensated by vacancies, and some of the phosphorus-vacancy clusters can become mobile around 700 °C to further cluster with isolated phosphorus ions. For efficient and stable doping, we use microwave annealing to selectively activate metastable phosphorus-vacancy clusters by interacting with their dipole moments, while keeping lattice heating below 700 °C. In a 30-nm-thick Si nanosheet doped with 3 × 1021 cm−3 phosphorus, a microwave power of 12 kW at 2.45 GHz for 6 min resulted in a free-electron concentration of 4 × 1020 cm−3 and a junction more abrupt than 4 decades/nm. The doping profile is stable with less than 4% variation upon thermal annealing around 700 °C for 5 min. Thus, microwave annealing can result in not only efficient activation and abrupt profile in epitaxial silicon but also thermal stability. In comparison, conventional rapid thermal annealing can generate a junction as abrupt as microwave annealing but 25% higher sheet resistance and six times higher instability at 700 °C.
Using a femtosecond laser incident to an oxide-metal-oxide film engraved with a subwavelength annular aperture (SAA) structure, we generated a Bessel-like beam to ablate silicon. Experimental results show that the silicon can be ablated with a input ablation threshold at 120 fs pulse duration. We obtained a surface hole possessing a diameter less than . Optical performance, including depth-of-focus and focal spot of the SAA structure, were simulated using finite-different time-domain calculations. We found that a far-field laser beam propagating through a SAA structure possesses a submicrometer focal spot and high focus intensity. Our method can be easily adopted for surface machining in microfabrication applications.