An aeroelastic beam finite element based on Euler-Bernoulli beam theory and two-dimensional unsteady aerodynamics is presented. Based on the flexural-torsional equations of motion of the wing the finite element formulation is provided by means of their weak form, taking into account the presence of trailing edge control surfaces that are considered flexible. Each aeroelastic beam presents transverse and rotation displacements due to bending and torsion of the wing box, torsion of the control surface, and the aerodynamic lag state. The developed finite element model is validated with literature and numerical flutter results of wings with and without control surfaces.
21 September 2022 in Mechanics of Advanced Materials and Structures
Additive manufacturing represents a great candidate to boost smart materials expansion in the Industry 4.0 era through 4 D printing technologies. However, to fully exploit the benefits of these technologies, increasing knowledge is needed on how internal defects condition the overall behavior of the component. In this work, the Representative Volume Element approach is presented to investigate, through Finite Element Analyses, how micro-voids influence the stress-strain behavior of an AlSi10Mg additively manufactured through the Selective Laser Melting technique. An in-house code on the commercial software ANSYS Parametric Design Language APDL was developed to model a random pore distribution inside the RVE and to apply the boundary conditions necessary for the RVE periodicity; comparison with reference case studies from the literature are reported.