One solution to realize spatial sound reproduction without a large number of distributed loudspeakers is to create virtual sources in the desired directions by using highly focusing real sources that project sound on reflective boundaries. Auditory events are then ideally located in the direction of the virtual sources created by sound projection rather than the direction of the real sources. However, due to physically limited focusing capabilities of real sources, the perception of the...
To make guitars with high sonic quality, it is essential to understand the relationship between the physical characteristics of the selected materials and the acoustic characteristics of the final instrument and how they will be perceived. The selection of wood for the soundboard is a crucial step in the guitar-making process. One relevant physical characteristic is internal material damping, about which, however, only little is known in comparison to other characteristics such as density and Young’s modulus. The present study investigated the relationship of soundboard damping to both physical and perceptual aspects of guitar sound. Three similar steel-string guitars were built with the damping of their soundboards varying between low, mid and high. Measurements of the transfer function and the plucked tone decay of the final guitars were carried out. A listening test and a playing test were conducted. The participants were asked to rate preference and seven sound attributes comprising loudness and both spectral and temporal aspects. To prepare the listening test, a short sequence was recorded by a professional guitarist with each guitar. The results suggest that varying soundboard damping had no practically relevant influence on the physical and perceptual aspects of the sound of the guitar used in this study.
10 September 2021 in Journal of the Audio Engineering Society
In spatial audio reproduction with sound projection, instead of placing loudspeakers in specific directions, virtual sources are created by projecting sound on reflective boundaries. The projected sound should dominate the localization. One limiting factor is the leading direct sound occurring because of physical limitations of the focusing capabilities of sound projectors. In this paper, localization masking, a method to reduce the influence of this direct sound on localization, is...
1 January 2017 in Proceedings of Meetings on Acoustics
One solution to reproduce sound from various directions is the projection of sound sources on reflective boundaries. In this case the perceived direction of the auditory event changes from the direction of the real source to the direction of the projected source. Therefore, highly focused sound sources are necessary. However, the focusing capabilities of such sources are physically limited. Thus, the total amount of sound at the listening position is formed by the projected sound and by sound which is directly radiated from the real source. Both of these sound proportions influence the perception of the listener. The present study investigates in which way the direct sound contributes to the auditory event in different scenarios with projected sound sources. It will be shown, that an increasing direct sound level leads to a separation of the auditory events in to parts which are located in different directions. However, this separation does not necessarily affect the effect of sound source projection.
1 May 2017 in The Journal of the Acoustical Society of America
One solution to reproduce sound from various directions is the projection of sound sources on reflective boundaries. In this case, the perceived direction of the auditory event changes from the direction of the real source to the direction of the projected source. Therefore, highly focused sound sources are necessary. However, the focusing capabilities of such sources are physically limited. Thus, the total amount of sound at the listening position is formed by the projected sound and by sound which is directly radiated from the real source. Both of these sound proportions influence the perception of the listener. In a scenario with projected sound sources, a complex mixture of perceptual attributes change besides the direction of the auditory event. The present study investigates some of those attributes.
Vibrations occurring when playing a musical instrument can affect how the quality of the instrument is perceived by the player. Previous studies on violins have investigated how vibrotactile feedback influences certain perceptual attributes and the perceived quality or preference of the instruments. These studies have found that, in addition to auditory feedback, vibrotactile feedback had an important influence on the corresponding ratings. In these studies, however, to control the vibrotactile feedback independently from the auditory feedback was only possible to a limited extent, or not at all. To overcome this limitation, the present study introduces a concept for the creation of a violin-like instrument on which both vibrotactile and auditory feedback can be controlled individually. To apply this concept, the feedback that the instrument exposes by itself to the player is required to be as minimal as possible. This keeps interference with the intended feedback to a minimum. It was decided to use an electric violin as the basis, as the usual absence of a hollow body being the most important airborne excitation source meets this requirement in the auditory domain already quite well. In the vibrotactile domain, however, meeting this requirement is more challenging, as most of the structure-borne excitation sources persist. Therefore, the present study investigated the vibrotactile feedback of electric violins. Two setups for measuring the vibrotactile feedback exposed to the player at the neck of a violin are presented. One setup was intended to ensure high reproducibility while the other one was intended to resemble real playing scenarios more closely. Using these two setups, measurements were carried out for a set of six electric violins. The results were discussed regarding physical and perceptual aspects. Finally, one electric violin was selected for the creation of a violin-like instrument with independently controllable auditory and vibrotactile feedback.