The accidents caused by roof pressure seriously restrict the improvement of mines and threaten production safety. At present, most coal mine pressure forecasting methods still rely on expert experience and engineering analogies. Artificial neural network prediction technology has been widely used in coal mines. This new approach can predict the surface pressure on the roof, which is of great significance in coal mine production safety. In this paper, the mining pressure mechanism of coal seam roofs is summarized and studied, and 60 sets of initial pressure data from multiple working surfaces in the Datong mining area are collected for gray correlation analysis. Finally, 12 parameters are selected as the input parameters of the model. Suitable back propagation (BP) and GA(genetic algorithm)-BP initial roof pressure prediction models are established for the Datong mining area and trained with MATLAB programming. By comparing the training results, we found that the optimized GA-BP model has a larger determination coefficient, smaller error, and greater stability. The research shows that the prediction method based on the GA-BP neural network model is relatively reliable and has broad engineering application prospects as an auxiliary decision-making tool for coal mine production safety.

Mine water that inrushes from coal-roof strata has always posed a substantial threat to mining activities every year. Therefore, an accurate prediction of the water-conducting fracture zone (WCFZ) height in the mining overburden strata is of great significance for the prevention and control of mine water accidents. The support vector regression (SVR) is proposed to predict the height of the WCFZ based on the mining depth, hard rock proportional coefficient, mining thickness and length of the working face. Simultaneously, the multi-population genetic algorithm (MPGA) is employed to search for the optimal SVR parameters. The MPGA-SVR model is trained and tested with a total of 69 collected data samples, and it is also applied to a field test. The accuracy and stability of the model were measured by the mean squared error and correlation coefficients. The obtained results show that the MPGA-SVR model achieves a higher accuracy and stability than the traditional empirical formula and genetic algorithm (GA)-SVR model. In terms of the process for optimizing the SVR parameters, the MPGA can find the optimal parameters more quickly and accurately, and it can effectively overcome the problem of premature and slow convergence of the genetic algorithm (GA). The proposed model improves the prediction accuracy and stability, which will help to avoid accidents caused by the inrush of water inrush in mining overburden strata and protect the ecological environment of the mining area.

The hydrogeological conditions of coal mines in China are quite complex, and water inrush accidents occur frequently with disastrous consequences during coal extraction. Among them, the risk of coal mining under a river is the highest due to the high water transmissivity and lateral charge capacity of the unconfined aquifer under the river. The danger of mining under a river requires the accurate determination of the developmental mechanisms of the water flowing fractured zone (WFFZ) and the water flow mechanisms influenced by the specific geological conditions of a coal mine. This paper first used the transient electromagnetic (TEM) method to monitor the development of the WFFZ and the water flow mechanisms following the mining of a longwall face under a river. The TEM survey results showed that the middle Jurassic coarse sandstone aquifer and the K_lzh unconfined aquifer were the main aquifers of the 8101 longwall panel, and the WFFZ reached the aquifers during the mining process. Due to the limited water reserves in the dry season, the downward flowing water mainly came from the lateral recharge in the aquifer. The water inrush mechanisms of the 8101 longwall panel in Selian No.1 Coal mine were analyzed based on the water flow mechanisms of the aquifer and the numerical simulation results. This provides theoretical and technical guidance to enact safety measures for mining beneath aquifers.

Electromagnetic tomography technology (EMT) is widely used in underground energy exploration. Limited by objective conditions, the collected projection data of electromagnetic waves are sparse and incomplete. Therefore, a study of the tomographic inversion algorithm of EMT based on incomplete projection data has an important guiding significance for the exploitation of underground energy. As a global optimization probability search algorithm, the simple genetic algorithm (SGA) has been widely used in the process of tomographic inversion. However, SGA evolves through a single population, and the values of crossover and mutation probability are always fixed, so there are risks of premature convergence and poor local search ability. To improve the performance of the SGA, a new approach of adaptive multi-population parallel genetic algorithm (AMPGA) with constraints is proposed in this paper. First, the AMPGA makes full use of multi-group adaptive co-evolution to improve the local and global search ability of SGA and restrain the risk of premature convergence. Then, the introduction of prior information as a constraint makes the results clearer and more accurate. The proposed algorithm has been verified in a numerical experiment and field tests, and the results show that the proposed algorithm can well balance global and local search capabilities, which offers a more realistic and stable tomographic result.

Precise prediction of coal thickness is of the utmost importance in realizing intelligent and unmanned mining. As the channel wave is characterized by an easily recognizable waveform, a long propagation distance, and strong energy, it is widely used for coal thickness inversion. However, most traditional inversion methods are local in nature, and the inversion result is probably not optimal in the global scope. This paper introduces the GA-SIRT hybrid approach, which combines Genetic Algorithms (GA) and Simultaneous Iterative Reconstructive Techniques (SIRT) in order to deal with the above problem and to improve the accuracy of coal thickness inversion. The proposed model takes full advantage of the strong global search capability of GA and of the fast local convergence rate of the SIRT. Moreover, it inhibits the poor local search ability and the local optimal value effect of the GA and the SIRT respectively. The application of the GA-SIRT in the Guoerzhuang coal mine has significantly enhanced its accuracy, stability, and overall computational efficiency. Hence, the introduced novel hybrid model can precisely resolve and identify the coal thickness according to the channel wave. It can also be extended to other geophysical tomographic inversion problems towards the reduction of potential local optimal solutions.