Proper selection of energy-efficient agricultural machinery helps to reduce drudgery, increase cropping intensity and reduce time required for field preparation. With conventional tillage implements, multiple passes are required to obtain desired seedbed which increase soil compaction due to repeated movement of tractor in field. With combined tillage implements two or more tillage implements are combined to reduce time and fuel energy required for seedbed preparation. In this paper, various researches on active-passive and passive-passive configurations of combined tillage implements have been discussed along with their working principles. It was found that these were associated with less draft, specific energy, and tire slippage compared to conventional implements which provides a sound basis for using them with suitable engine power to improve the power utilization of tractors. Hence, use of these implements could help to reduce soil compaction, labour, fuel cost as well as save time in preparing seedbed. More analytical studies and classical approaches are needed to predict energy requirements of these implements from the knowledge of individual energy requirements of conventional implements to help in proper matching of tractor-implement and also to develop decision support systems. Considering their promising outcomes, they will emerge as effective tools to improve agricultural mechanization.
27 February 2023 in Spanish Journal of Agricultural Research
Aim of study: To develop a new type of cabbage (Brassica oleracea L.) harvesting mechanism in the laboratory that can be used in small-scale cabbage harvester in Indian conditions with minimum power requirement. Area of study: Indian Institute of Technology, Kharagpur, India Material and methods: The mechanism consisted of a cutting unit, a pushing unit and a conveying unit. Two counter-rotating disc cutters were used as cutting devices. Cutting speed, forward speed and cutting position were considered as influential parameters for torque required to carry out the harvesting of cabbage. A full factorial design was followed for the experiment and response surface methodology was used to optimize these parameters for minimizing torque requirement for cutting and pushing the cabbage. Main results Torque decreased when cutting speed increased and when cutting height from the cabbage head decreased. Statistical analysis showed that cutting speed and cutting position affected the total torque significantly. The optimized cutting speed, forward speed and cutting position were found as 590 rpm, 0.25 m s-1 and 0 cm, respectively with a desirability of 0.995. A regression model was developed to predict the total torque for cutting the cabbage stem and it was validated against 10 datasets with a percentage of bias within 10%. Research highlights: The mechanism developed for cabbage harvesting could successfully cut and lift the cabbage heads in the laboratory. These optimized parameters are to be followed in the field prototype cabbage harvester for its successful operation in the field.
12 July 2021 in Journal of The Institution of Engineers (India): Series A