Thick wall structures involving longitudinal wave are typically utilized in aerospace engineering, nuclear power engineering, precision transmission device design, and pressure vessels design. Consequently, developing sophisticated dynamic models for thick plates is of paramount importance. However, the commonly used longitudinal vibration equation is of the second order, which is regarded as a plane stress problem. Its dispersion curve is a straight line, which cannot describe the actual dispersion in the plate. In this paper, the spectral analysis of Navier equation describing three-dimensional elasto-dynamics is carried out by using the symmetric and asymmetric spectral decomposition theory of differential operators and introducing the concept of virtual differential operators. The infinite product operator series describing longitudinal vibration are truncated into fourth order. The governing equation of longitudinal vibration consists of a fourth-order wave equation and a second-order wave equation. Owing to the fact that no a priori assumptions were introduced during the derivation of its dynamic equations, the proposed plate dynamic model boasts higher precision and is applicable across a broader frequency spectrum and for plates with greater thicknesses. This is a breakthrough in the longitudinal vibration equation of plates.
This paper presents a targeted study on the dynamic stress concentration (DSC) in piezoelectric materials induced by SH waves, focusing on the impact of elliptical openings. By using the elliptic cylindrical coordinate system and Mathieu functions, the wave fields are decomposed into functional series. Through the establishment of a set of infinite equations with mode coefficients based on the boundary conditions, the distribution of the dynamic stress concentration coefficient is visualized via numerical simulation. Furthermore, the impact of incident wave frequency, incident angle, and elliptic eccentricity on the stress concentration coefficient is analyzed. The results demonstrate a strong correlation between these parameters and the dynamic stress concentration coefficient. These findings hold significant implications for enhancing the strength and fatigue life of piezo-electric materials, as well as for selecting appropriate nondestructive testing methods.