This paper presents results of experimental tests on soil specimens reinforced by stone columns. The experimental investigations have been conducted by setting up a laboratory scaled model. The main objective is to evaluate the effects of various reinforcing materials and stone columns configurations on the axial deformation during a vertical loading test of cylindrical samples of unreinforced and reinforced soil. The findings have been compared to existing experimental results proposed in literature. The specimens of soil consisted in an analogic material of poly-dispersed glass beads (GB) with a grain size smaller than 50 µm. Two reinforcing materials have been considered as ballasts: crushed sand (CS) and coarser granularity GB (0.7–1.0 mm). The results show that the material type and spacing between columns in a triangular or square configuration can greatly affect the reinforcement efficiency. The proposed results are applicable to predict the improvement of granular soils of medium density when subjected to the vibrocompaction technique.
The main objective of this study is to compare the mechanical behavior of two sands (Hostun or Dune sands) mixed with crushed rubber obtained from used tires. However, it is essential to ensure that his geotechnical application do not result in long-term negative impacts on the environment. The chemical properties of these two sands are given by energy dispersive analysis X-ray fluorescence spectrometry. The mineral composition of these two sands is performed by X-ray diffractometry. The morphological characteristics of the sand grains are given by the analysis of the images of the two sands given by the scanning electron microscope. This study is based on 120 direct shear tests performed on sand-rubber aggregate mixtures. The results show that the rubber content of the aggregates has a significant effect on the shear strength of sand-rubber mixtures in both cases of sand. In fact, the shear strength of the sand-rubber mixture increases with increasing crushed rubber up to 20% for different normal stresses. The analysis of the test results also shows the effect of the angular shape of the sand grains on the interparticle friction. The contribution of the structure effect in the mobilized friction is analyzed by comparing the shear test results of Hostun and dune sand mixtures.