Mechanical weed management is a drudging task that requires manpower and has risks when conducted within rows of orchards. However, intrarow weeding must still be conducted by manual labor due to the restricted movements of riding mowers within the rows of orchards due to their confined structures with nets and poles. However, autonomous robotic weeders still face challenges identifying uncut weeds due to the obstruction of Global Navigation Satellite System (GNSS) signals caused by poles and tree canopies. A properly designed intelligent vision system would have the potential to achieve the desired outcome by utilizing an autonomous weeder to perform operations in uncut sections. Therefore, the objective of this study is to develop a vision module using a custom-trained dataset on YOLO instance segmentation algorithms to support autonomous robotic weeders in recognizing uncut weeds and obstacles (i.e., fruit tree trunks, fixed poles) within rows. The training dataset was acquired from a pear orchard located at the Tsukuba Plant Innovation Research Center (T-PIRC) at the University of Tsukuba, Japan. In total, 5000 images were preprocessed and labeled for training and testing using YOLO models. Four versions of edge-device-dedicated YOLO instance segmentation were utilized in this research—YOLOv5n-seg, YOLOv5s-seg, YOLOv8n-seg, and YOLOv8s-seg—for real-time application with an autonomous weeder. A comparison study was conducted to evaluate all YOLO models in terms of detection accuracy, model complexity, and inference speed. The smaller YOLOv5-based and YOLOv8-based models were found to be more efficient than the larger models, and YOLOv8n-seg was selected as the vision module for the autonomous weeder. In the evaluation process, YOLOv8n-seg had better segmentation accuracy than YOLOv5n-seg, while the latter had the fastest inference time. The performance of YOLOv8n-seg was also acceptable when it was deployed on a resource-constrained device that is appropriate for robotic weeders. The results indicated that the proposed deep learning-based detection accuracy and inference speed can be used for object recognition via edge devices for robotic operation during intrarow weeding operations in orchards.
With the decreasing and aging agricultural workforce, fruit harvesting robots equipped with higher degrees of freedom (DoF) manipulators are seen as a promising solution for performing harvesting operations in unstructured and complex orchard environments. In such a complex environment, guiding the end-effector from its starting position to the target fruit while avoiding obstacles poses a significant challenge for path planning in automatic harvesting. However, existing studies often rely on manually constructed environmental map models and face limitations in planning efficiency and computational cost. Therefore, in this study, we introduced a collision-free path planning method for a 6-DoF orchard harvesting manipulator using an RGB-D camera and the Bi-RRT algorithm. First, by transforming the RGB-D camera’s point cloud data into collision geometries, we achieved 3D obstacle map reconstruction, allowing the harvesting robot to detect obstacles within its workspace. Second, by adopting the URDF format, we built the manipulator’s simulation model to be inserted with the reconstructed 3D obstacle map environment. Third, the Bi-RRT algorithm was introduced for path planning, which performs bidirectional expansion simultaneously from the start and targets configurations based on the principles of the RRT algorithm, thereby effectively shortening the time required to reach the target. Subsequently, a validation and comparison experiment were conducted in an artificial orchard. The experimental results validated our method, with the Bi-RRT algorithm achieving reliable collision-free path planning across all experimental sets. On average, it required just 0.806 s and generated 12.9 nodes per path, showing greater efficiency in path generation compared to the Sparse Bayesian Learning (SBL) algorithm, which required 0.870 s and generated 15.1 nodes per path. This method proved to be both effective and fast, providing meaningful guidance for implementing path planning for a 6-DoF manipulator in orchard harvesting tasks.
Accurate localization of apples is the key factor that determines a successful harvesting cycle in the automation of apple harvesting for unmanned operations. In this regard, accurate depth sensing or positional information of apples is required for harvesting apples based on robotic systems, which is challenging in outdoor environments because of uneven light variations when using 3D cameras for the localization of apples. Therefore, this research attempted to overcome the effect of light variations for the 3D cameras during outdoor apple harvesting operations. Thus, integrated single-point laser sensors for the localization of apples using a state-of-the-art model, the EfficientDet object detection algorithm with an mAP@0.5 of 0.775 were used in this study. In the experiments, a RealSense D455f RGB-D camera was integrated with a single-point laser ranging sensor utilized to obtain precise apple localization coordinates for implementation in a harvesting robot. The single-point laser range sensor was attached to two servo motors capable of moving the center position of the detected apples based on the detection ID generated by the DeepSORT (online real-time tracking) algorithm. The experiments were conducted under indoor and outdoor conditions in a spindle-type apple orchard artificial architecture by mounting the combined sensor system behind a four-wheel tractor. The localization coordinates were compared between the RGB-D camera depth values and the combined sensor system under different light conditions. The results show that the root-mean-square error (RMSE) values of the RGB-D camera depth and integrated sensor mechanism varied from 3.91 to 8.36 cm and from 1.62 to 2.13 cm under 476~600 lx to 1023~1100 × 100 lx light conditions, respectively. The integrated sensor system can be used for an apple harvesting robotic manipulator with a positional accuracy of ±2 cm, except for some apples that were occluded due to leaves and branches. Further research will be carried out using changes in the position of the integrated system for recognition of the affected apples for harvesting operations.
The architecture of apple orchards can be converted to easier operation by implementing the use of a low‐cost, tractor‐mounted, dual manipulator based on a robotic harvesting system with lower degrees of freedom (DoF). To accurately avoid injuries by detecting apples, an efferent, real‐time vision system that includes a new gripping mechanism was developed. In this context, by introducing a new gripping system, spindle wall‐type apple orchard architectures have high potential for easy harvesting using a robotic platform. Therefore, this study was conducted to design and develop a tractor‐mounted, machine vision‐based, 3‐DoF, dual telescopic robotic cartesian system with a novel 2‐DoF gripping mechanism for apple harvesting. The machine vision system was developed using the EfficientDet object detection deep neural network with a mAP@0.5 of 0.775. The tracking algorithm DeepSORT was selected to track the localized apples and transfer the G ‐code to the robotic arm system. The developed novel gripping mechanism consists of three vacuum‐powered, (400 mmHg) spring‐loaded, silicone fingers that provide 0.73 N.m (±0.1) twisting torque to apples in a natural orientation (90°) and a dragging force of 17.65 N (±0.5). The average harvesting cycle time was approximately eleven seconds for both robotic arms, including detection and completion of the harvesting cycle.