Low-Gain Avalanche Diodes (LGAD) are the sensor of choice for the timing detectors of the ATLAS and CMS experiments at the High Luminosity Large Hadron Collider (HL-LHC). This paper presents the results of static and dynamic performance evaluations of LGADs manufactured by Hamamatsu Photonics K.K. (HPK) and Brookhaven National Laboratory (BNL). Timing performance was measured using β-scopes after a static characterization of the device (current-voltage and capacitance-voltage curves) and a time resolution better than 35 ps was extracted under high operational bias voltage before irradiation. This value is considered within the nominal requirements of the ATLAS project for un-irradiated sensors. Transient Current Technique (TCT) was used to observe and analyze a gain suppression mechanism, i.e. a decrease in gain correlated with increased laser intensities. TCAD simulations were carried out to interpret the gain suppression of the BNL sensors under different conditions of bias voltage and laser intensity. A good correspondence between experimental observations and TCAD simulations was found.
Low-Gain Avalanche Diodes (LGADs) are critical sensors for the ATLAS and CMS timing detectors at the High Luminosity Large Hadron Collider (HL-LHC), offering enhanced timing resolution with gain factors of 20 to 50. However, their radiation tolerance is hindered by the Acceptor Removal Phenomenon (ARP), which deactivates boron in the gain layer, reducing gain below the threshold for accurate timing. This study investigates the radiation hardness of thin, carbon-doped LGAD sensors developed by Brookhaven National Laboratory (BNL) to address ARP-induced limitations. Active dopant profiles in the gain layer, junction, and bulk were measured using a Spreading Resistance Probe (SRP) profilometer, and the effects of annealing and neutron irradiation at fluences of 3 × 1014, 1 × 1015, and 3 × 1015 neq/cm2 (1 MeV equivalent) were analyzed. Low carbon dose rates showed minimal improvement due to enhanced deactivation, while higher doses improved radiation hardness, demonstrating a non-linear dose–response relationship. These findings highlight the potential of optimizing gain layers with high carbon doses and low-diffusion boron to extend LGAD lifetimes in high-radiation environments. Future research will refine carbon implantation strategies and explore alternative approaches to further enhance the radiation hardness of LGADs.
Neutron diagnostics is a key aspect of nuclear fusion research. However, the tools and methodologies that are available are complex, and thus, neutron diagnostic tools are often used by specialized communities. Here, we present an accessible framework for neutron counting. In this study, we provide a comprehensive description of how to detect and quantify fast neutrons using a single EJ-309 liquid organic scintillation detector. We generate the fast neutrons using a bespoke benchtop reactor that mediates deuterium-deuterium nuclear fusion. This tutorial lays out for the reader how to address technical challenges associated with detector configuration, calibration, characterization, and data processing in mixed neutron/gamma-ray fields. This work aims to accelerate fusion research by making neutron diagnostics accessible to broader scientific communities.