Narrow linewidth lasers have many applications, such as higher order coherent communications, optical sensing, and metrology. While semiconductor lasers are typically unsuitable for such applications due to relatively low coherence, recent advances in heterogeneous integration of III-V with silicon have shown that this is no longer true. In this tutorial, we discuss in-depth techniques that are used to drastically reduce the linewidth of a laser. The heterogeneous silicon-III/V platform can fully utilize these techniques, and fully integrated lasers with Lorentzian linewidth on the order of 100 Hz and tuning range of 120 nm are shown.
9 November 2021 in IEEE Journal of Selected Topics in Quantum Electronics
The performance of silicon photonic components and integrated circuits has improved dramatically in recent years. As a key enabler, heterogeneous integration not only provides the optical gain which is absent from native Si substrates and enables complete photonic functionalities on chip, but also lays the foundation of versatile integrated photonic device performance engineering. This paper reviews recent progress of high-performance silicon photonics using heterogeneous integration, with emphasis on ultra-low-loss waveguides, single-wavelength lasers, comb lasers, and photonic integrated circuits including optical phased arrays for LiDAR and optical transceivers for datacenter interconnects.
19 August 2019 in IEEE Journal of Selected Topics in Quantum Electronics
This paper presents recent results on widely-tunable narrow-linewidth semiconductor lasers using a ring-resonator based mirror as the extended cavity. Two generations of lasers on the heterogeneous Si/InP photonic platform are presented. The first-generation lasers, with a total footprint smaller than 0.81 $\text{mm}^2$ , showed an intrinsic linewidth of ~2 kHz over a 40 nm wavelength tuning range across C+L bands. The second-generation lasers using ultra-low loss silicon waveguides and a novel cavity design achieved an intrinsic linewidth below 220 Hz. The lasers also possess an ultrawide wavelength tuning range of 110 nm across three optical communication bands (S+C+L). These are records among all fully integrated semiconductor lasers reported in the literature.
Making a (precision) measure of light: When measuring length, we learn in school that a vernier scale that uses two rulers, slightly offset, can reduce human estimation error and improve the resolution of a measurement. Yang et al. apply the same vernier principle with optical combs to develop a spectrometer that can determine the wavelength of light with high accuracy and precision. Two phase-locked counterpropagating optical microcombs generated in a miniature microresonator provided the rulers. Matching up of the “teeth” of the combs was then used to measure the wavelength of the optical light sources. Science , this issue p. 965
Integrated ultra-low-loss waveguides are highly desired for integrated photonics to enable applications that require long delay lines, high-Q resonators, narrow filters, etc. Here, we present an ultra-low-loss silicon waveguide on 500 nm thick Silicon-On-Insulator (SOI) platform. Meter-scale delay lines, million-Q resonators and tens of picometer bandwidth grating filters are experimentally demonstrated. We design a low-loss low-reflection taper to seamlessly integrate the ultra-low-loss waveguide with standard heterogeneous Si/III-V integrated photonics platform to allow realization of high-performance photonic devices such as ultra-low-noise lasers and optical gyroscopes.
23 October 2017 in Journal of Lightwave Technology
We describe the measurement and characterization of an interferometric optical gyroscope that uses an integrated 3-m large-area silicon nitride waveguide coil with waveguide loss <;0.78 dB/m that is compatible with wafer-scale integration. The angle random walk and bias instability were measured to be 8.52°/h 1/2 and 58.7°/h, respectively. The measured performance is comparable to that of a commercial rate grade gyroscope, demonstrating that chip-scale integration is a feasible path to low cost, low power, compact implementation of optical gyroscope, and realization of longer coils will expand use of this technology to more demanding navigation applications.