Based on the great advantages of an inner hollow structure and excellent solid counterpart capacity, complex hierarchical structures have been widely used as electrodes for lithium‐ion batteries. Herein, hierarchical yolk–shell Cu2O@CuO‐decorated RGO (YSRs) was designed and synthesized via a multi‐step approach. Octahedron‐like Cu2O‐decorated RGO was firstly produced, in which GO was reduced slightly while cuprous oxide was synthesized. Subsequently, the controlled oxidation of Cu2O@RGO led to the synthesis of special YSRs, which were composed of a solid Cu2O core, spur‐CuO, CuO shell, and RGO covered. As anode materials, YSRs could provide considerable capacity density. Meanwhile, the void existed between shells and solid active materials retaining the advantages of inner hollow structure. As a result, the unique architecture of the materials renders the composites with enhanced electronic and ionic diffusion kinetics, high specific capacity (~894 mAh g‐1, 0.1C), and an excellent rate capability.
14 February 2019 in Beilstein Journal of Nanotechnology
A stable and highly sensitive graphene/hydrogel strain sensor is designed by introducing glycerol as a co-solvent in the formation of a hydrogel substrate and then casting a graphene solution onto the hydrogel in a simple, two-step method. This hydrogel-based strain sensor can effectively retain water in the polymer network due to the formation of strong hydrogen bonding between glycerol and water. The addition of glycerol not only enhances the stability of the hydrogel over a wider temperature range, but also increases the stretchability of the hydrogel from 800% to 2000%. The enhanced sensitivity can be attributed to the graphene film, whereby the graphene flakes redistribute to optimize the contact area under different strains. The careful design enables this sensor to be used in both stretching and bending modes. As a demonstration, the as-prepared strain sensor was applied to sense the movement of finger knuckles. Given the outstanding performance of this wearable sensor, together with the proposed scalable fabrication method, this stable and sensitive hydrogel strain sensor is considered to have great potential in the field of wearable sensors.