Environmental protection is deeply rooted in current societies. In this context, searching for new environmentally friendly energy sources is one of the objectives of industrial policies in general, and of the metallurgical industries in particular. One of these energy sources is solar energy, which offers a great potential in high temperature applications, such as those required in metallurgy processes, when properly concentrated. In this paper, we propose the utilization of concentrated solar energy in ironmaking. We have studied the utilization of concentrated solar thermal in the agglomeration of iron ore mixtures and in the obtaining of iron via reduction with carbon (and coke breeze). The results from the experiments show the typical phases of the iron ore sinters and the presence of iron through smelting reduction.
Until the 1950s of the last century, the oxidized iron ores that were loaded into the blast furnace had granulometries within 10 and 120 mm. However, the depletion of high-grade iron ore sources has made necessary the utilization of concentration processes with the purpose of enriching the iron ore. Because of these processes, a fine granulometry is produced, and thus iron agglomeration process is necessary. There are several agglomeration processes including: briquetting, extrusion, nodulization, pelletizing and sintering, although pelletizing and sintering are the most widely used, and especially sintering process (70% blast furnace load). Apart from obtaining an agglomerated product, the objective is reaching the suitable characteristics (thermal, mechanical, physical, and chemical) in a product that is then fed into the blast furnace, achieving a homogenous and stable operation in this furnace with economical profitability.
Manganese is an element of interest in metallurgy, especially in ironmaking and steel making, but also in copper and aluminum industries. The depletion of manganese high grade sources and the environmental awareness have led to search for new manganese sources, such as wastes/by-products of other metallurgies. In this way, we propose the recovery of manganese from anodic lodes and scrapings of the zinc electrolysis process because of their high Mn content (>30%). The proposed process is based on a mixed leaching: a lixiviation-neutralization at low temperature (50 °C, reached due to the exothermic reactions involved in the process) and a lixiviation with sulfuric acid at high temperature (150–200 °C, in heated reactor). The obtained solution after the combined process is mainly composed by manganese sulphate. This solution is then neutralized with CaO (or manganese carbonate) as a first purification stage, removing H2SO4 and those impurities that are easily removable by controlling pH. Then, the purification of nobler elements than manganese is performed by their precipitation as sulphides. The purified solution is sent to electrolysis where electrolytic manganese is obtained (99.9% Mn). The versatility of the proposed process allows for obtaining electrolytic manganese, oxide of manganese (IV), oxide of manganese (II), or manganese sulphate.
Solar energy when properly concentrated offers a great potential in high temperature applications as those required in metallurgical processes. Even when concentrated solar energy cannot compete with conventional metallurgical processes, it could find application in the treatment of wastes from these processes. These by-products are characterized by their high metallic contents, which make them interesting as they could be a raw material available in the own factory. Slags are one of these by-products. Slags are most of them disposed in controlled landfill with environmental impact, but also with economic impact associated to the storing costs and the metallic losses. Here we propose the treatment of ferromanganese and silicomanganese slags with concentrated solar energy with the purpose of evaluating the recovery of manganese from these slags.