The electrical and optical characteristics of GaN-based light-emitting diodes (LEDs) with various kinds of electron blocking layers (EBLs) are analyzed numerically. The results indicate that an enhanced hole injection efficiency and a reduced electron leakage could be achieved with the GaN-based LED where a p-InAlGaN/GaN superlattice (SL) was employed as EBL as compared with the conventional GaN-based LEDs using rectangular p-AlGaN EBL or p-AlGaN/GaN SL EBL. Moreover, it was found that the efficiency droop could be significantly improved at high injection current density for GaN-based LEDs with p-InAlGaN/GaN SL EBL.
An InGaN laser diode with InGaN–GaN–InGaN delta barriers was designed and investigated numerically. The laser power–current–voltage performance curves, carrier concentrations, current distributions, energy band structures, and non-radiative and stimulated recombination rates in the quantum wells were characterized. The simulations indicate that an InGaN laser diode with InGaN–GaN–InGaN delta barriers has a lower turn-on current, a higher laser power, and a higher slope efficiency than those with InGaN or conventional GaN barriers. These improvements originate from modified energy bands of the laser diodes with InGaN–GaN–InGaN delta barriers, which can suppress electron leakage out of, and enhance hole injection into, the active region.
Fiber coupling is difficult due to the uneven beam parameter product between the vertical and horizontal axes of semiconductor lasers. A beam shaping technique based on the combination of the internal total reflection and polarization surface of a stepped prism is proposed to achieve filling the dark area of the beam and polarization merging, as well as enabling the polarization plane to be multiplexed and the utilization rate of the polarization plane to be increased. The proposed technology can couple three groups of stacked array semiconductor lasers into a single fiber, in which the center diameter is 200 µm, and the numerical aperture is 0.22. The simulation results indicated that the output power of 1099 W and optical-optical conversion productivity of 85.8% were achieved.
24 September 2021 in Semiconductor Science and Technology
InGaN laser diodes (LDs) with composition-graded (CG) quantum barriers (QBs) are proposed and our study of them described. In the CG QB LDs, the indium content x in the In x Ga
1-
x N QB was increased gradually along the growth direction. Their laser power–current–voltage performance curves, carrier concentrations, energy band diagrams, current distributions, electrostatic fields, and stimulated recombination rate in the active region were studied. It is shown that the laser power increases from 59.8 mW to 106.9 mW at 120 mA and the slope efficiency increases from 0.76 W A −1 to 1.27 W A −1 , when the conventional GaN QBs are replaced by the proposed CG QBs. The simulation results indicate that LDs with CG QBs performed better than LDs with conventional GaN QBs and InGaN QBs because the suppression of electron leakage is more efficient, as is hole injection and carrier-stimulated recombination in multiple quantum wells through the appropriate formation of polarization energy band structures.
Integrated optical antennas are essential components of optical phased arrays for applications in light detection and ranging technology. To achieve larger detection distances, wider detection ranges, and higher scanning resolutions, it is imperative to employ millimeter-scale or longer effective lengths to achieve a narrow beam width, coupled with high radiation efficiency. In the high refractive index contrast silicon photonics platform, achieving a narrow far-field beam width and high radiation efficiency simultaneously is a formidable challenge. In the article, a subwavelength grating waveguide antenna with interleaved grooved lateral radiating block arrays is proposed. The simulation result shows that an effective length of about 3.3 mm is attained, with a corresponding far-field beam width is 0.02°, and a radiation efficiency of 0.785 at the wavelength of 1550 nm. It is also found that the crosstalk between the adjacent grating antennas designed in the range of 1.49 μm ∼ 1.61 μm is less than −15.6 dB.