The public health threats imposed by toxoplasmosis worldwide and by malaria in sub-Saharan countries are directly associated with the capacity of their related causative agents Toxoplasma and Plasmodium, respectively, to colonize and expand inside host cells. Therefore, deciphering how these two Apicomplexan protozoan parasites access their host cells has been highlighted as a priority research with the perspective of designing anti-invasive molecules to prevent diseases. Central to the mechanism of invasion for both genera is mechanical force, which is thought to be applied by the parasite at the interface between the two cells following assembly of a unique cell-cell junction but this model lacks direct evidence and has been challenged by recent genetic studies. In this work, using parasites expressing the fluorescent core component of this junction, we analyze characteristic features of the kinematics of penetration of more than 1,000 invasion events. The majority of invasion events occur with a typical forward rotational progression of the parasite through a static junction into an invaginating host cell plasma membrane. However, if parasites encounter resistance and if the junction is not strongly anchored to the host cell cortex, as when parasites do not secrete the toxofilin protein and, therefore, are unable to locally remodel the cortical actin cytoskeleton, the junction travels retrogradely with the host cell membrane along the parasite surface allowing the formation of a functional vacuole. Kinetic measurements of the invasive trajectories strongly support a similar parasite driven force in both static and capped junctions, both of which lead to successful invasion. However, about 20% of toxofilin mutants fail to enter and eventually disengage from the host cell membrane while the secreted RhOptry Neck (RON2) molecules are posteriorally capped before being cleaved and released in the medium. By contrast in cells characterized by low cortex tension and high cortical actin dynamics junction capping and entry failure are drastically reduced. This kinematic analysis newly highlights that to invade cells parasites need to engage their motor with the junction molecular complex where force is efficiently applied only upon proper anchorage to the host cell membrane and cortex.
Background: The objective of this study was to analyze the amplitude of translational and rotational movements occurring during stereotactic body radiotherapy (SBRT) of spinal metastases in two different positioning devices. The relevance of intra-fractional imaging and the influence of treatment time were evaluated. Methods: Twenty patients were treated in the supine position either (1) on a body vacuum cushion with arms raised and resting on a clegecel or (2) on an integrated SBRT solution consisting of a SBRT table top, an Orfit™ AIO system, and a vacuum cushion. Alignments between the cone beam computed tomography (CBCT) and the planning computed tomography allowed corrections of inter- and intra-fraction positional shifts using a 6D table. The absolute values of the translational and rotational setup errors obtained for 329 CBCT were recorded. The translational 3D vector, the maximum angle, and the characteristic times of the treatment fractions were calculated. Results: An improvement in the mean (SD) inter-fraction 3D vector (mm) from 7.8 (5.9) to 5.9 (3.8) was obtained by changing the fixation devices from (1) to (2) (p < 0.038). The maximum angles were less than 2° for a total of 87% for (1) and 96% for (2). The mean (SD) of the intra-fraction 3D vectors (mm) was lower for the new 1.1 (0.8) positioning fixation (2) compared to the old one (1) 1.7 (1.7) (p = 0.004). The angular corrections applied in the intra-fraction were on average very low (0.4°) and similar between the two systems. A strong correlation was found between the 3D displacement vector and the fraction time for (1) and (2) with regression coefficients of 0.408 (0.262–0.555, 95% CI) and 0.069 (0.010–0.128, 95% CI), respectively. An accuracy of 1 mm would require intra-fraction imaging every 5 min for both systems. If the expected accuracy was 2 mm, then only system (2) could avoid intra-fractional imaging. Conclusions: This study allowed us to evaluate setup errors of two immobilization devices for spine SBRT. The association of inter- and intra-fraction imaging with 6D repositioning of a patient is inevitable. The correlation between treatment time and corrections to be applied encourages us to move toward imaging modalities which allow a reduction in fraction time.
1 January 2023 in Technology in Cancer Research & Treatment
The objective was to investigate the possibility of using ExacTrac X-ray (ETX) for 6D image guidance in stereotactic body radiation therapy (SBRT) of bone metastasis and to propose a patient management protocol. The analyses were first obtained from measurements on a pelvic phantom and on 19 patients treated for bone metastasis. The phantom study consisted of applying known offsets and evaluating the ETX level of accuracy, where results were compared with kV-cone beam computed tomography (kV-CBCT). Two groups of patients, 10 spinal and 9 nonspinal SBRT cases, were analyzed to evaluate ETX imaging for different bone localisations. A comparison was made between kV-CBCT and ETX prior to the treatment fractions. During treatments, two other kV-CBCT/ETX image pairs were also acquired and a total of 224 shifts were compared. A second study, using the ETX monitoring module, analyzed the intrafraction motion of 8 other patients. In the phantom study, the root mean square (RMS) of the translational and rotational discrepancies between ETX and kV-CBCT were < 0.6 mm and < 0.4°, respectively. For both groups of patients, the RMS of the discrepancies observed between the two imaging systems were greater than the phantom experiment while still remaining < 1 mm and < 0.7°. In the nonspinal group, three patients (2 scapulas and 1 humerus) did not have consistent shift values with ETX due to a lack of anatomical information. When ETX monitoring was used during irradiation, the setup errors measured were on average less than 1 mm/1°. The results obtained validated the use of ETX for 6D image guidance during bone SBRT. Real-time tracking of the target position improves the accuracy of the irradiation. This strategy allowed for faster correction of out-of-tolerance positioning errors. The registration of bone lesions with poor anatomical information is a limitation of this 2D-kV imaging system.
Background/Objectives: An on-board imager on a linear accelerator allows the acquisition of kV-2D images during irradiation. Overlaying specific structures on these images enables the visual verification of movement at regular frequencies. Our aim was to validate this tracking method for the stereotactic treatment of bone metastases. Methods: Shifts in three translational directions were simulated using an anthropomorphic phantom. For these simulated shifts, planar images were acquired at different angles of incidence, with overlaid volumes of interest. A blinded test was then administered to the 18 participants to evaluate their decisions regarding whether to stop treatment. The results considered the experience of the operators. Quantitative analyses were performed on the intra-fractional images of 29 patients. Results: Participants analyzed each image with an average (standard deviation) decision time of 3.0 s (2.3). For offsets of 0.0, 1.0, 1.5, and 2.0 mm, the results were 78%, 93%, 90%, and 100% for the expert group and 78%, 70%, 79%, and 88% for the less-experienced group. Clinical feedback confirmed this guidance technique and extended it to non-spinal bony metastases. Sudden movements exceeding the 2.0 mm threshold occurred in 3.3% of the analyzed fractions, with a detection rate of 97.8% for vertebral locations. For non-vertebral bone locations, movements exceeding a threshold of 3.0 mm occurred in 3.5% of cases and were detected in 96.5%. Conclusions: The clinical use of planar OBI and superimposed structures for visual-image guidance in bone stereotactic treatment was validated using an anthropomorphic phantom and clinical feedback.
Introduction: Acquisition of dosimetric knowledge by radiation therapy planners is a protracted and complex process. This study delves into the impact of empirical predictive models based on the knowledge-based planning (KBP) methodology, aimed at detecting suboptimal results and homogenizing and improving existing practices for prostate cancer. Moreover, the dosimetric effect of implementing these models into routine clinical practice was also assessed.Materials and methods: Based on the KBP method, we analyzed 25 prostate treatment plans performed using VMAT by expert operators, aiming to correlate dose indicators with patient geometry. The , and of the peritoneal cavity and the and of the rectum and bladder were linked to geometric characteristics such as the distance from the planning target volume (PTV) to the organs at risk (OAR), the volume of the OAR, or the overlap between the PTV and the OAR. In the second phase, the KBP was used in routine clinical practice in a prospective cohort of 25 patients and compared with the 41 patient plans calculated before implementing the tool.Results: Using linear regression, we identified strong geometric predictive factors for the peritoneal cavity, rectum, and bladder (> 0.8), with an average prescribed dose of 97.8%, covering 95% of the target volume. The use of the model led to a significant dose reduction for all evaluated OARs. This trend was most notable for . Significant reductions were also obtained in average doses to the rectum and bladder, and respectively. Based on this model, we reduced the number of plans with OAR constraints above the clinical recommendations from 19% to 8%.Conclusions: The KBP methodology established a robust and personalized predictive model for dose estimation to organs at risk in prostate cancer. Implementing the model resulted in improved sparing of these organs. Notably, it yields a solid foundation for harmonizing dosimetric practices, alerting us to suboptimal results, and improving our knowledge.
This study presents a comprehensive methodology for implementing a unified knowledge-based planning model for RapidPlan™ (RP) to manage all 11 prostate cancer prescriptions used at our institution. Several RP configurations were evaluated to address different clinical scenarios. The initial models RP_46 and RP_30 involved the prostate, seminal vesicles, and lymph nodes treated with 46 Gy in 23 fractions and the prostate alone treated with 30 Gy in 15 fractions, respectively. These models were progressively expanded to incorporate all sequential boost treatment plans (RP_46 + 30), including those targeting the prostate bed (RP_Seq). Simultaneous integrated boost prescriptions were used to train the RP_SIB model, which was subsequently combined with the RP_Seq model to form the unified RP_UNI model. Each configuration was compared with the manual method using a cohort of 10–25 patients. All the models produced treatment plans that met the clinical requirements. An overall analysis revealed that the RP_UNI model significantly reduced the 45 Gy and 15 Gy volumes (cm3) in the peritoneal cavity by approximately 18%. The RP_UNI model was chosen for clinical implementation owing to its broader applicability compared with the other models, offering a 66% reduction in planning time with respect to the manual method. The unified model, derived from simpler RP configurations, successfully integrated all 11 prostate cancer prescriptions used at our institution. This model performed efficiently regardless of the complexity of the target volumes or whether the irradiation technique was a sequential or simultaneous integrated boost.